Hoskins Heating Element, 250 Watt 120 Volt
Hoskins Heating Element, 250 Watt 120 Volt is backordered and will ship as soon as it is back in stock.
Delivery and Shipping
Delivery and Shipping
All products will ship according to shipping option selected at checkout. Standard USPS and UPS average shipping times are 2-7 and freight up to 2 weeks. Allow extra time during peak season and the holidays. For more information see our Shipping Policy.
Hoskins Heating Element, 250 Watt 120 Volt
Description
Description
Hoskins 250 watt element, 120 volt
The bare 250 watt heating element for Hoskins waterers, the one fitted to the A250 heater. Two hundred and fifty watts on 120 volts, drawing a little over two amps.
This is the element, not the complete heater
What you see here is the bare heating element on its leads. The complete Hoskins heater is a different part: a galvanized housing with the element, a blower, a thermostat and a cord already built in, listed separately and priced accordingly. Buy the element if yours has burned out and the housing is sound. Buy the complete heater if the whole assembly is finished.
Specifications
- Output: 250 watts
- Voltage: 120 volts
- Current: about 2.1 amps
- Lead: bare ended, hard wired, not a plug in element
- Mounting: frame mounted, clear of the stainless tank
Fits these Hoskins models
- HC7-16
- HC7-26
- HC14-16
- HC14-26
- SC22-16
- H9-14D
- H9-14D SS
- H9-22S
- H9-22S SS
- H9-22D
- H9-22D SS
Thermostat
This element is in the Hoskins A and AA family, which runs the small thermostat. The large thermostat belongs on the B, 2B, C, 2C and 3C heaters and is a different part.
Wiring it in
Hoskins calls for #8 copper from the waterer to the breaker box, an eight foot ground rod at the waterer, and a GFCI breaker where local code requires one. The factory wire size chart runs from 30 to 400 feet of cable at 115 to 120 volts on a 200 amp service at 2 percent voltage drop; it is printed in the Hoskins installation instructions. Hoskins advises a licensed electrician for the hookup.
Not sure which element you have?
Pull the old one and read it before you order. If you cannot, send us the model number off the waterer through the contact form and we will match it.
