How to Winterize Your Miraco Energy Free Waterer
Gaskets, valve and float, drainage, water level and an optional heater. What to check on a Miraco energy free waterer before the cold sets in.
Ruth Peterson |
PeteCo Supply
Waterer Help and Guides
Installation, winter prep, cleaning and repair for the automatic waterers we sell. Search by brand, model or part number, or pick a topic below.
-
-
Can the Trojan Specialty Products Barrel Waterer Kit Be Used Outdoors in Winter?
The Trojan gravity flow barrel waterer kit is built for warmer weather. Here is why it is not a winter waterer and what to use instead.
Ruth Peterson |
-
How to Test Your Automatic Waterer Immersion Heater Before Winter
Put the heater in the freezer for 10 to 15 minutes to trip the thermostat, then plug it in. If it gets noticeably hot, it works.
Ruth Peterson |
-
Miraco Energy Free Waterers, Winter Preparation
Gasket, float and valve, drinker balls and drain plugs. What to check on a MiraFount or E-Fount in the warmer months so it is ready for winter.
Ruth Peterson |
-
Stock Tank Heaters
Immersion heaters, Farm Innovators de-icers in floating, submersible and drain plug styles, the gas fired 66B, and two options that use no heat at all.
Ruth Peterson |
-
Prepare Your Ritchie Waterer for Winter
Test the heaters with a bucket of ice, check the sealant, center the water line in the riser tube and clean the unit before the cold sets in.
Ruth Peterson |
-
Ritchie Thrifty King Closure, Ideal Level
The white closures should sit 1/2 inch to 1 inch below the rim, not flush with the red top, so water washes off instead of pooling and freezing them in...
Ruth Peterson |
-
Trojan 66B Stock Tank Heater, Tip
Mount the gas fired 66B tilting slightly forward so condensation drips off the outside instead of running inside and interfering with the pilot light.
Ruth Peterson |
Winter prep reminders, parts alerts, nothing else
A few emails a year, sent when it matters. Heat kits before the freeze, valve rebuilds before spring turnout.
