Say Goodbye to Pin Hole Leaks: The Upgraded Miraco 345 Bob Float with Brass Insert
The Miraco 345 bob float now has a molded in brass insert where the plastic threads used to develop pinhole leaks.
Ruth Peterson |
PeteCo Supply
Waterer Help and Guides
Installation, winter prep, cleaning and repair for the automatic waterers we sell. Search by brand, model or part number, or pick a topic below.
-
-
Where Can I Purchase Replacement Parts for Miraco Waterers?
Drain plugs, gaskets, valves, floats and heaters for Mirafount, E-Fount, BigSpring and LilSpring waterers, and how to find the right one for your model.
Ruth Peterson |
-
How to Tell the Difference Between Franklin Automatic Waterer Valves
The 1/2 inch and 3/4 inch Franklin valves look identical from the outside. The orifice inside is the tell: pencil tip versus pencil eraser.
Ruth Peterson |
-
How to Assemble the Ritchie High Pressure Valve Assembly 18832
What is in the 18832 high pressure valve assembly, which parts it replaces, and a video showing how it goes together.
Ruth Peterson |
-
Selecting the Right Ritchie 1/2" Valve for Your Water Pressure
White for low pressure, red for 40 to 60 PSI, green for over 60 PSI. Which Ritchie 1/2 inch valve belongs in your waterer.
Ruth Peterson |
-
Ritchie CD-50 Parts
CD-50 is not a model number, it is the paint process Ritchie used on its metal units. If your label says CD-50, you likely have one of three waterers.
Ruth Peterson |
Winter prep reminders, parts alerts, nothing else
A few emails a year, sent when it matters. Heat kits before the freeze, valve rebuilds before spring turnout.
