{"title":"Petersen Concrete Waterers","description":"\u003cp\u003ePetersen concrete automatic waterers are built to hold ground temperature through the seasons. The poured concrete body stays put, resists livestock abuse, and gives you years of reliable service. These units ship by freight or can be picked up in Houghton, Iowa.\u003c\/p\u003e","products":[{"product_id":"petersen-combination-concrete-waterer","title":"Petersen PETE #150C Combination Cattle and Hog Waterer 600-0005","description":"\u003cp\u003eThe Petersen PETE #150C is the one unit in the line that waters two kinds of stock. Cattle drink from the upper trough and hogs from the lower one, both fed by the same float and valve package, so a shared yard gets one pad, one water line and one unit instead of two of everything.\u003c\/p\u003e\u003cp\u003eIt is poured from 5,000 PSI air entrained concrete over 3\/8 inch welded rebar cages, the same body Petersen has been pouring in Denison, Iowa since 1958. At 1,000 pounds it does not need to be bolted down, and the concrete mass holds ground temperature far better than a poly casing, so the heater is not fighting the trough all winter.\u003c\/p\u003e\u003cp\u003eEvery edge is rounded to prevent injury and to make the trough easier to clean out. The deluxe hinged hoods open for service even in freezing weather, and the large insulated access doors leave real room to work on the plumbing. If you prefer to run it without power, Petersen builds a no heat version on request.\u003c\/p\u003e","brand":"Petersen","offers":[{"title":"Default Title","offer_id":44267739054275,"sku":"600-0005","price":1150.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/600-0005_94427035-81bb-40b1-bb6d-180067401a00.png?v=1791327027"},{"product_id":"petersen-thoroughbred-i-02-horse-waterer-600-0021","title":"Petersen Thoroughbred I-02 Automatic Horse Waterer 600-0021","description":"\u003cp\u003eThe Thoroughbred I-02 is Petersen's single bowl concrete horse fountain, rated for 8 horses off a 2 gallon bowl. It also suits calves, which is why the factory lists it as a horse or calf fountain. The stainless steel rounded hood keeps the bowl covered and the water clean, and the whole unit sits low and heavy so a horse cannot shift it.\u003c\/p\u003e\u003cp\u003ePetersen builds these in 5,000 PSI black painted concrete reinforced with 3\/8 inch welded rebar cages, with up to 2 inches of extruded polystyrene insulation through the body. The edges are smooth and rounded so there is nothing for an animal to catch on, the bowls self flush through drains up to 3 inches, and the galvanized and stainless steel parts are heavy gauge. Brass non siphon valves are standard, with nylon valves available. Made in the USA and carried by a five year warranty.\u003c\/p\u003e\u003cp\u003eHeat is 250 watts of Free-Flo, with a no heat version available on request. Hook up is straightforward for both the pipeline and the electric.\u003c\/p\u003e\u003cp\u003e18 inches by 24 inches by 24 inches, 400 pounds.\u003c\/p\u003e","brand":"Petersen","offers":[{"title":"Default Title","offer_id":54097168826563,"sku":"600-0021","price":739.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/600-0021_65dd8c93-fb33-40f7-8ca0-2ffe6602f7ef.png?v=1791327038"},{"product_id":"petersen-thoroughbred-ii-horse-waterer-600-0020","title":"Petersen Thoroughbred II Automatic Horse Waterer 600-0020","description":"\u003cp\u003eThe Thoroughbred II is the two bowl version of Petersen's concrete horse fountain, rated for 12 horses off a 3 gallon capacity. The extra length puts a bowl on each end, so two horses can drink at once without crowding, and the stainless steel rounded hood runs the length of the unit.\u003c\/p\u003e\u003cp\u003ePetersen builds these in 5,000 PSI black painted concrete reinforced with 3\/8 inch welded rebar cages, with up to 2 inches of extruded polystyrene insulation through the body. The edges are smooth and rounded so there is nothing for an animal to catch on, the bowls self flush through drains up to 3 inches, and the galvanized and stainless steel parts are heavy gauge. Brass non siphon valves are standard, with nylon valves available. Made in the USA and carried by a five year warranty.\u003c\/p\u003e\u003cp\u003eHeat is 250 watts, with a no heat version available on request. The plastic door will not rot or rust the way a steel one does.\u003c\/p\u003e\u003cp\u003e27 1\/2 inches by 24 inches by 24 inches, 500 pounds.\u003c\/p\u003e","brand":"Petersen","offers":[{"title":"Default Title","offer_id":54097168859331,"sku":"600-0020","price":802.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/600-0020.png?v=1791327042"},{"product_id":"petersen-k-9-doggie-waterer-600-0063","title":"Petersen K-9 Doggie Waterer 600-0063","description":"\u003cp\u003eThe K-9 is Petersen's concrete dog waterer, built for dog runs and kennels where a plastic or steel bowl gets chewed, tipped or frozen. The concrete bowl is heavy enough that a dog cannot move it and easy to keep clean, and the 350 watt electric heat keeps fresh water in front of the dog through the winter.\u003c\/p\u003e\u003cp\u003ePetersen builds these in 5,000 PSI black painted concrete reinforced with 3\/8 inch welded rebar cages, with up to 2 inches of extruded polystyrene insulation through the body. The edges are smooth and rounded so there is nothing for an animal to catch on, the bowls self flush through drains up to 3 inches, and the galvanized and stainless steel parts are heavy gauge. Brass non siphon valves are standard, with nylon valves available. Made in the USA and carried by a five year warranty.\u003c\/p\u003e\u003cp\u003eA no heat version is available on request.\u003c\/p\u003e\u003cp\u003e20 inches long by 17 inches wide by 6 inches high, 71 pounds.\u003c\/p\u003e","brand":"Petersen","offers":[{"title":"Default Title","offer_id":54097168892099,"sku":"600-0063","price":338.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/600-0063_b64bc7f4-521b-4de2-b443-70e441442d1e.png?v=1791327026"},{"product_id":"petersen-k-10-automatic-pet-waterer-600-0076","title":"Petersen K-10 Automatic Pet Waterer 600-0076","description":"\u003cp\u003eThe K-10 is the double sided kennel waterer, built to sit on the fence line between two runs so dogs on both sides drink off one unit and one water line. It holds 3 gallons and waters up to 4 dogs, with a stainless steel rounded hood over the bowls and a plastic door that will not rot or rust.\u003c\/p\u003e\u003cp\u003ePetersen builds these in 5,000 PSI black painted concrete reinforced with 3\/8 inch welded rebar cages, with up to 2 inches of extruded polystyrene insulation through the body. The edges are smooth and rounded so there is nothing for an animal to catch on, the bowls self flush through drains up to 3 inches, and the galvanized and stainless steel parts are heavy gauge. Brass non siphon valves are standard, with nylon valves available. Made in the USA and carried by a five year warranty.\u003c\/p\u003e\u003cp\u003eHeat is 250 watts, with a no heat version available on request.\u003c\/p\u003e\u003cp\u003e27 1\/2 inches by 24 inches by 6 inches, 200 pounds.\u003c\/p\u003e","brand":"Petersen","offers":[{"title":"Default Title","offer_id":54097168924867,"sku":"600-0076","price":735.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/600-0076_1ed6139e-40f8-4f58-ba9e-27692e3573ed.png?v=1791327024"},{"product_id":"petersen-super-pete-34c-cattle-waterer-600-0065","title":"Petersen Super PETE 34C Cattle Waterer 600-0065","description":"\u003cp\u003eThe Super PETE 34C is the small end of Petersen's cattle line, 13 gallons for up to 175 head in a 34 inch body. It also shows up on the horse side of the catalog, because the drink height and the open bowl suit horses as well as cattle.\u003c\/p\u003e\u003cp\u003ePetersen pours these in 5,000 PSI black painted concrete reinforced with 3\/8 inch welded rebar cages, with up to 2 inches of extruded polystyrene insulation. The weight is the point: a concrete waterer does not blow over, does not shift when cattle lean on it, and needs no bolting down. The plastic doors and valve covers will not rust, the float chamber is large and deep, the drains are 3 inch self cleaning, and the rounded hood sheds snow and ice instead of collecting it. Smooth rounded edges mean nothing for an animal to catch on and less to work around when you clean it.\u003c\/p\u003e\u003cp\u003eHeat is 1,000 watts, in 120 volt or 240 volt, or you can run it Free-Flo with a thermostatically controlled trickle valve instead of an element. \u003c\/p\u003e\u003cp\u003e25 in H x 34 in L x 30 in W, 1030 pounds.\u003c\/p\u003e","brand":"Petersen","offers":[{"title":"Default Title","offer_id":54097169973443,"sku":"600-0065","price":940.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/600-0065_5aefc4c0-2635-45e2-87e0-278c7f6800fc.png?v=1791329469"},{"product_id":"petersen-super-pete-34e-cattle-waterer-600-0066","title":"Petersen Super PETE 34E Cattle Waterer 600-0066","description":"\u003cp\u003eThe Super PETE 34E is the 34 inch cattle waterer, 13 gallons for up to 175 head, built on the same body as the 34C. Like the 34C it crosses over to horses, so a mixed yard can run one unit.\u003c\/p\u003e\u003cp\u003ePetersen pours these in 5,000 PSI black painted concrete reinforced with 3\/8 inch welded rebar cages, with up to 2 inches of extruded polystyrene insulation. The weight is the point: a concrete waterer does not blow over, does not shift when cattle lean on it, and needs no bolting down. The plastic doors and valve covers will not rust, the float chamber is large and deep, the drains are 3 inch self cleaning, and the rounded hood sheds snow and ice instead of collecting it. Smooth rounded edges mean nothing for an animal to catch on and less to work around when you clean it.\u003c\/p\u003e\u003cp\u003eHeat is 1,000 watts, in 120 volt or 240 volt, or you can run it Free-Flo with a thermostatically controlled trickle valve instead of an element. \u003c\/p\u003e\u003cp\u003e25 in H x 34 in L x 30 in W, 1030 pounds.\u003c\/p\u003e","brand":"Petersen","offers":[{"title":"Default Title","offer_id":54097170038979,"sku":"600-0066","price":940.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/600-0066_7d077112-4e60-4076-8aa8-5c531281483c.png?v=1791327040"},{"product_id":"petersen-super-pete-44c-cattle-waterer-600-0064","title":"Petersen Super PETE 44C Cattle Waterer 600-0064","description":"\u003cp\u003eThe Super PETE 44C steps up to an 18 gallon trough in a 44 inch body, rated for 250 head. It is the size most yards land on when one 34 is not keeping up through a hot stretch.\u003c\/p\u003e\u003cp\u003ePetersen pours these in 5,000 PSI black painted concrete reinforced with 3\/8 inch welded rebar cages, with up to 2 inches of extruded polystyrene insulation. The weight is the point: a concrete waterer does not blow over, does not shift when cattle lean on it, and needs no bolting down. The plastic doors and valve covers will not rust, the float chamber is large and deep, the drains are 3 inch self cleaning, and the rounded hood sheds snow and ice instead of collecting it. Smooth rounded edges mean nothing for an animal to catch on and less to work around when you clean it.\u003c\/p\u003e\u003cp\u003eHeat is 1,000 watts, in 120 volt or 240 volt, or you can run it Free-Flo with a thermostatically controlled trickle valve instead of an element. \u003c\/p\u003e\u003cp\u003e25 in H x 44 in L x 30 in W, 1250 pounds.\u003c\/p\u003e","brand":"Petersen","offers":[{"title":"Default Title","offer_id":54097170071747,"sku":"600-0064","price":1048.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/600-0064.png?v=1791324718"},{"product_id":"petersen-super-pete-44e-cattle-waterer-600-0067","title":"Petersen Super PETE 44E Cattle Waterer 600-0067","description":"\u003cp\u003eThe Super PETE 44E carries an 18 gallon trough in a 44 inch body for up to 250 head, and adds a concrete hood protector over the top.\u003c\/p\u003e\u003cp\u003ePetersen pours these in 5,000 PSI black painted concrete reinforced with 3\/8 inch welded rebar cages, with up to 2 inches of extruded polystyrene insulation. The weight is the point: a concrete waterer does not blow over, does not shift when cattle lean on it, and needs no bolting down. The plastic doors and valve covers will not rust, the float chamber is large and deep, the drains are 3 inch self cleaning, and the rounded hood sheds snow and ice instead of collecting it. Smooth rounded edges mean nothing for an animal to catch on and less to work around when you clean it.\u003c\/p\u003e\u003cp\u003eHeat is 1,000 watts, in 120 volt or 240 volt, or you can run it Free-Flo with a thermostatically controlled trickle valve instead of an element. \u003c\/p\u003e\u003cp\u003e25 in H x 44 in L x 30 in W, 1250 pounds.\u003c\/p\u003e","brand":"Petersen","offers":[{"title":"Default Title","offer_id":54097170104515,"sku":"600-0067","price":1048.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/600-0067.png?v=1791327041"},{"product_id":"petersen-super-pete-94c-cattle-waterer-600-0068","title":"Petersen Super PETE 94C Cattle Waterer 600-0068","description":"\u003cp\u003eThe Super PETE 94C is the feedlot and dairy unit, a 94 inch body holding 38 gallons for up to 425 head. The concrete is air entrained so it does not crack, and a concrete hood protector covers the top.\u003c\/p\u003e\u003cp\u003ePetersen pours these in 5,000 PSI black painted concrete reinforced with 3\/8 inch welded rebar cages, with up to 2 inches of extruded polystyrene insulation. The weight is the point: a concrete waterer does not blow over, does not shift when cattle lean on it, and needs no bolting down. The plastic doors and valve covers will not rust, the float chamber is large and deep, the drains are 3 inch self cleaning, and the rounded hood sheds snow and ice instead of collecting it. Smooth rounded edges mean nothing for an animal to catch on and less to work around when you clean it.\u003c\/p\u003e\u003cp\u003eHeat is 1,000 watts, in 120 volt or 240 volt, or you can run it Free-Flo with a thermostatically controlled trickle valve instead of an element. \u003c\/p\u003e\u003cp\u003e25 in H x 94 in L x 30 in W, 2400 pounds.\u003c\/p\u003e","brand":"Petersen","offers":[{"title":"Default Title","offer_id":54097170137283,"sku":"600-0068","price":1313.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/600-0068_95220613-723c-4125-b2e6-ccc0d440aa3e.png?v=1791327044"},{"product_id":"petersen-pete-74s-feedlot-fountain-600-0027","title":"Petersen PETE #74S Cattle and Sheep Feedlot Fountain 600-0027","description":"\u003cp\u003eThe PETE #74S is the low profile feedlot fountain, 74 inches of trough standing only 15 inches tall so sheep and smaller cattle can reach it without a step. It holds 20 gallons and waters up to 250 head.\u003c\/p\u003e\u003cp\u003ePetersen pours these in 5,000 PSI black painted concrete reinforced with 3\/8 inch welded rebar cages. The black finish picks up solar heat and the body carries up to 2 inches of extruded polystyrene insulation, which is what keeps the heating bill down. The weight means no bolting down, and the body is designed for expansion and contraction so it is not working against itself through a freeze and thaw.\u003c\/p\u003e\u003cp\u003eHeat is 1,000 watts in 120 volt or 240 volt, or you can run it Free-Flo with a thermostatically controlled trickle valve instead of an element. A no heat version is available on request. Hook up is straightforward for both the pipeline and the electric.\u003c\/p\u003e\u003cp\u003e74 in L x 21 in W x 15 in H, 1400 pounds, 20 gallons.\u003c\/p\u003e","brand":"Petersen","offers":[{"title":"Default Title","offer_id":54097170792643,"sku":"600-0027","price":1022.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/600-0027_588233e9-1440-4a71-a641-c77646381d6d.png?v=1791327022"},{"product_id":"petersen-pete-474s-feedlot-fountain-600-0031","title":"Petersen PETE #474S Cattle and Sheep Feedlot Fountain 600-0031","description":"\u003cp\u003eThe PETE #474S is the wider version of the 74S, same 74 inch length and 20 gallons but 24 inches across instead of 21. The extra width gives animals more room at the trough without taking more fence line.\u003c\/p\u003e\u003cp\u003ePetersen pours these in 5,000 PSI black painted concrete reinforced with 3\/8 inch welded rebar cages. The black finish picks up solar heat and the body carries up to 2 inches of extruded polystyrene insulation, which is what keeps the heating bill down. The weight means no bolting down, and the body is designed for expansion and contraction so it is not working against itself through a freeze and thaw.\u003c\/p\u003e\u003cp\u003eHeat is 1,000 watts in 120 volt or 240 volt, or you can run it Free-Flo with a thermostatically controlled trickle valve instead of an element. A no heat version is available on request. Hook up is straightforward for both the pipeline and the electric.\u003c\/p\u003e\u003cp\u003e74 in L x 24 in W x 15 in H, 1400 pounds, 20 gallons.\u003c\/p\u003e","brand":"Petersen","offers":[{"title":"Default Title","offer_id":54097170858179,"sku":"600-0031","price":1150.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/600-0031_deb5964f-6537-4617-8221-caee13561b60.png?v=1791327021"},{"product_id":"petersen-pete-84s-feedlot-fountain-600-0028","title":"Petersen PETE #84S Cattle and Sheep Feedlot Fountain 600-0028","description":"\u003cp\u003eThe PETE #84S runs 84 inches of trough at 30 gallons for up to 300 head, still at the 15 inch height that lets sheep and smaller cattle drink comfortably.\u003c\/p\u003e\u003cp\u003ePetersen pours these in 5,000 PSI black painted concrete reinforced with 3\/8 inch welded rebar cages. The black finish picks up solar heat and the body carries up to 2 inches of extruded polystyrene insulation, which is what keeps the heating bill down. The weight means no bolting down, and the body is designed for expansion and contraction so it is not working against itself through a freeze and thaw.\u003c\/p\u003e\u003cp\u003eHeat is 1,000 watts in 120 volt or 240 volt, or you can run it Free-Flo with a thermostatically controlled trickle valve instead of an element. A no heat version is available on request. Hook up is straightforward for both the pipeline and the electric.\u003c\/p\u003e\u003cp\u003e84 in L x 21 in W x 15 in H, 1600 pounds, 30 gallons.\u003c\/p\u003e","brand":"Petersen","offers":[{"title":"Default Title","offer_id":54097170923715,"sku":"600-0028","price":1043.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/600-0028_599d93a8-df5b-4843-8099-32b8530a6186.png?v=1791327020"},{"product_id":"petersen-pete-484s-feedlot-fountain-600-0032","title":"Petersen PETE #484S Cattle and Sheep Feedlot Fountain 600-0032","description":"\u003cp\u003eThe PETE #484S is the wide 84 inch fountain, 24 inches across rather than 21, holding 30 gallons for up to 300 head at the same low 15 inch height.\u003c\/p\u003e\u003cp\u003ePetersen pours these in 5,000 PSI black painted concrete reinforced with 3\/8 inch welded rebar cages. The black finish picks up solar heat and the body carries up to 2 inches of extruded polystyrene insulation, which is what keeps the heating bill down. The weight means no bolting down, and the body is designed for expansion and contraction so it is not working against itself through a freeze and thaw.\u003c\/p\u003e\u003cp\u003eHeat is 1,000 watts in 120 volt or 240 volt, or you can run it Free-Flo with a thermostatically controlled trickle valve instead of an element. A no heat version is available on request. Hook up is straightforward for both the pipeline and the electric.\u003c\/p\u003e\u003cp\u003e84 in L x 24 in W x 15 in H, 1600 pounds, 30 gallons.\u003c\/p\u003e","brand":"Petersen","offers":[{"title":"Default Title","offer_id":54097171022019,"sku":"600-0032","price":1170.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/600-0032_847fc115-50fc-423e-b835-e6ae42fb40db.png?v=1791327018"},{"product_id":"petersen-pete-94s-feedlot-fountain-600-0029","title":"Petersen PETE #94S Cattle and Sheep Feedlot Fountain 600-0029","description":"\u003cp\u003eThe PETE #94S is the longest of the low profile fountains, 94 inches of trough holding 40 gallons for up to 350 head, and still only 15 inches tall.\u003c\/p\u003e\u003cp\u003ePetersen pours these in 5,000 PSI black painted concrete reinforced with 3\/8 inch welded rebar cages. The black finish picks up solar heat and the body carries up to 2 inches of extruded polystyrene insulation, which is what keeps the heating bill down. The weight means no bolting down, and the body is designed for expansion and contraction so it is not working against itself through a freeze and thaw.\u003c\/p\u003e\u003cp\u003eHeat is 1,000 watts in 120 volt or 240 volt, or you can run it Free-Flo with a thermostatically controlled trickle valve instead of an element. A no heat version is available on request. Hook up is straightforward for both the pipeline and the electric.\u003c\/p\u003e\u003cp\u003e94 in L x 21 in W x 15 in H, 1800 pounds, 40 gallons.\u003c\/p\u003e","brand":"Petersen","offers":[{"title":"Default Title","offer_id":54097171153091,"sku":"600-0029","price":1064.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/600-0029_1bb07a3a-86e9-4fec-87bb-ad7289a1a9a3.png?v=1791327018"},{"product_id":"petersen-little-pete-2-hog-waterer-600-0055","title":"Petersen Little PETE #2 Concrete Hog Waterer 600-0055","description":"\u003cp\u003eThe Little PETE #2 is the small concrete hog waterer, 120 head off a unit that sits only 8 1\/2 inches tall. Concrete is the point here: a hog cannot move it, chew it or root it out of place.\u003c\/p\u003e\u003cp\u003ePetersen pours these in 5,000 PSI black painted concrete reinforced with 3\/8 inch welded rebar cages, with a reinforced concrete bowl for extra strength where the hogs work it. Insulation runs from 3\/4 inch styrofoam up to 2 inches of extruded polystyrene. The weight means no bolting down, the bowls self flush through large brass drains, and the edges are smooth and rounded so there is nothing for a hog to catch on and less to work around when you clean it.\u003c\/p\u003e\u003cp\u003eHeat is 350 watt, or you can run it Free-Flo with a thermostatically controlled adjustable trickle valve that keeps the water moving rather than heating it. A no heat version is available on request. Hook up for the pipeline and the electric runs through the non siphon tube.\u003c\/p\u003e\u003cp\u003e30 in L x 27 in W x 8 1\/2 in H, 300 pounds.\u003c\/p\u003e","brand":"Petersen","offers":[{"title":"Default Title","offer_id":54097171742915,"sku":"600-0055","price":609.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/600-0055_0d87bb62-9a25-450c-9409-ddbd31ee4a22.png?v=1791328617"},{"product_id":"petersen-little-pete-4-hog-waterer-600-0056","title":"Petersen Little PETE #4 Concrete Hog Waterer 600-0056","description":"\u003cp\u003eThe Little PETE #4 doubles the capacity of the #2 to 240 head on the same 30 inch footprint, built as a fenceline unit so pens on both sides water off one line.\u003c\/p\u003e\u003cp\u003ePetersen pours these in 5,000 PSI black painted concrete reinforced with 3\/8 inch welded rebar cages, with a reinforced concrete bowl for extra strength where the hogs work it. Insulation runs from 3\/4 inch styrofoam up to 2 inches of extruded polystyrene. The weight means no bolting down, the bowls self flush through large brass drains, and the edges are smooth and rounded so there is nothing for a hog to catch on and less to work around when you clean it.\u003c\/p\u003e\u003cp\u003eHeat is 350 watt, or you can run it Free-Flo with a thermostatically controlled adjustable trickle valve that keeps the water moving rather than heating it. A no heat version is available on request. Hook up for the pipeline and the electric runs through the non siphon tube.\u003c\/p\u003e\u003cp\u003e30 in L x 27 in W x 8 1\/2 in H, 375 pounds.\u003c\/p\u003e","brand":"Petersen","offers":[{"title":"Default Title","offer_id":54097171775683,"sku":"600-0056","price":654.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/600-0056_9ff54a8a-8e8e-48e6-bb5b-c9f918d50e25.png?v=1791328618"},{"product_id":"petersen-big-pete-2-hog-waterer-600-0057","title":"Petersen Big PETE #2 Hog Waterer 600-0057","description":"\u003cp\u003eThe Big PETE #2 waters 120 head from a more compact 26 inch body than the Little PETE, with the same reinforced concrete bowl and large brass drains.\u003c\/p\u003e\u003cp\u003ePetersen pours these in 5,000 PSI black painted concrete reinforced with 3\/8 inch welded rebar cages, with a reinforced concrete bowl for extra strength where the hogs work it. Insulation runs from 3\/4 inch styrofoam up to 2 inches of extruded polystyrene. The weight means no bolting down, the bowls self flush through large brass drains, and the edges are smooth and rounded so there is nothing for a hog to catch on and less to work around when you clean it.\u003c\/p\u003e\u003cp\u003eHeat is 350 watt, or you can run it Free-Flo with a thermostatically controlled adjustable trickle valve that keeps the water moving rather than heating it. A no heat version is available on request. Hook up for the pipeline and the electric runs through the non siphon tube.\u003c\/p\u003e\u003cp\u003e26 in L x 24 in W x 8 1\/2 in H, 300 pounds.\u003c\/p\u003e","brand":"Petersen","offers":[{"title":"Default Title","offer_id":54097171873987,"sku":"600-0057","price":638.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/600-0057_767c5673-6656-4806-8bc3-6b0eb9c8efa1.png?v=1791328620"},{"product_id":"petersen-big-pete-4-hog-waterer-600-0058","title":"Petersen Big PETE #4 Hog Waterer 600-0058","description":"\u003cp\u003eThe Big PETE #4 waters 240 head and carries a 500 watt element, the largest heat in the Big PETE line below the #6.\u003c\/p\u003e\u003cp\u003ePetersen pours these in 5,000 PSI black painted concrete reinforced with 3\/8 inch welded rebar cages, with a reinforced concrete bowl for extra strength where the hogs work it. Insulation runs from 3\/4 inch styrofoam up to 2 inches of extruded polystyrene. The weight means no bolting down, the bowls self flush through large brass drains, and the edges are smooth and rounded so there is nothing for a hog to catch on and less to work around when you clean it.\u003c\/p\u003e\u003cp\u003eHeat is 500 watt, or you can run it Free-Flo with a thermostatically controlled adjustable trickle valve that keeps the water moving rather than heating it. A no heat version is available on request. Hook up for the pipeline and the electric runs through the non siphon tube.\u003c\/p\u003e\u003cp\u003e425 pounds.\u003c\/p\u003e","brand":"Petersen","offers":[{"title":"Default Title","offer_id":54097171972291,"sku":"600-0058","price":707.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/600-0058_b991ff46-a2d5-44fa-b42f-721cd286dd8d.png?v=1791328621"},{"product_id":"petersen-big-pete-6-hog-waterer-600-0059","title":"Petersen Big PETE #6 Hog Waterer 600-0059","description":"\u003cp\u003eThe Big PETE #6 is the largest concrete hog waterer Petersen builds, 360 head off a 48 inch fenceline body with drains up to 3 inches.\u003c\/p\u003e\u003cp\u003ePetersen pours these in 5,000 PSI black painted concrete reinforced with 3\/8 inch welded rebar cages, with a reinforced concrete bowl for extra strength where the hogs work it. Insulation runs from 3\/4 inch styrofoam up to 2 inches of extruded polystyrene. The weight means no bolting down, the bowls self flush through large brass drains, and the edges are smooth and rounded so there is nothing for a hog to catch on and less to work around when you clean it.\u003c\/p\u003e\u003cp\u003eHeat is 350 watt, or you can run it Free-Flo with a thermostatically controlled adjustable trickle valve that keeps the water moving rather than heating it. A no heat version is available on request. Hook up for the pipeline and the electric runs through the non siphon tube.\u003c\/p\u003e\u003cp\u003e48 in L x 26 in W x 8 1\/2 in H, 600 pounds.\u003c\/p\u003e","brand":"Petersen","offers":[{"title":"Default Title","offer_id":54097172070595,"sku":"600-0059","price":810.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/600-0059_5de95425-0379-4bbc-b279-458854690afd.png?v=1791328622"},{"product_id":"petersen-pete-150s-sheep-feedlot-fountain-600-0004","title":"Petersen PETE #150S Sheep and Small Cattle Feedlot Fountain 600-0004","description":"\u003cp\u003eThe PETE #150S is the compact sheep fountain, 6 gallons for up to 150 head in a 32 inch body standing 19 inches tall. It suits small cattle as well, which is why the factory lists it as a sheep or small cattle feedlot fountain.\u003c\/p\u003e\u003cp\u003ePetersen pours it in 5,000 PSI black painted concrete reinforced with 3\/8 inch welded rebar cages, with up to 2 inches of extruded polystyrene insulation. The weight means no bolting down. The bowl self flushes through a drain up to 3 inches, the hinged hood makes servicing workable even in freezing weather, and the edges are smooth and rounded so there is nothing for an animal to catch on.\u003c\/p\u003e\u003cp\u003eHeat is 350 watts in 120 volt or 240 volt, or you can run it Free-Flo with a thermostatically controlled trickle valve instead of an element.\u003c\/p\u003e\u003cp\u003e32 in L x 28 in W x 19 in H, 600 pounds.\u003c\/p\u003e","brand":"Petersen","offers":[{"title":"Default Title","offer_id":54097172332739,"sku":"600-0004","price":851.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/600-0004_ec1506ec-9503-4f26-8df5-02b7b94e70d5.png?v=1791327024"},{"product_id":"petersen-pete-225-dairy-feedlot-fountain-600-0007","title":"Petersen PETE #225 Dairy and Feedlot Fountain 600-0007","description":"\u003cp\u003eThe PETE #225 is the entry point into Petersen's dairy and feedlot line, a 46 inch body holding 20 gallons for up to 250 head.\u003c\/p\u003e\u003cp\u003ePetersen pours these in 5,000 PSI black painted concrete reinforced with 3\/8 inch welded rebar cages. The black finish picks up solar heat and the body carries up to 2 inches of extruded polystyrene insulation, which is what keeps the winter bill down. The concrete is air entrained and designed for expansion and contraction, so freeze and thaw is not working the unit apart. The weight means no bolting down.\u003c\/p\u003e\u003cp\u003eHeat is 500 watt at 120V, or you can run it Free-Flo with a thermostatically controlled trickle valve instead of an element. A no heat version is available on request. Hook up is straightforward for both the pipeline and the electric.\u003c\/p\u003e\u003cp\u003e46 in L x 28 in W x 26 in H, 1065 pounds, 20 gallons.\u003c\/p\u003e","brand":"Petersen","offers":[{"title":"Default Title","offer_id":54097173119171,"sku":"600-0007","price":1022.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/600-0007_51aa5717-934f-4706-a395-93decc7d5afd.png?v=1791327030"},{"product_id":"petersen-pete-250-dairy-feedlot-fountain-600-0008","title":"Petersen PETE #250 Dairy and Feedlot Fountain 600-0008","description":"\u003cp\u003eThe PETE #250 is the single trough dairy and feedlot fountain, 46 inches long holding 20 gallons for up to 250 head.\u003c\/p\u003e\u003cp\u003ePetersen pours these in 5,000 PSI black painted concrete reinforced with 3\/8 inch welded rebar cages. The black finish picks up solar heat and the body carries up to 2 inches of extruded polystyrene insulation, which is what keeps the winter bill down. The concrete is air entrained and designed for expansion and contraction, so freeze and thaw is not working the unit apart. The weight means no bolting down.\u003c\/p\u003e\u003cp\u003eHeat is 500 watt at 120V, or you can run it Free-Flo with a thermostatically controlled trickle valve instead of an element. A no heat version is available on request. Hook up is straightforward for both the pipeline and the electric.\u003c\/p\u003e\u003cp\u003e46 in L x 28 in W x 26 in H, 1065 pounds, 20 gallons.\u003c\/p\u003e","brand":"Petersen","offers":[{"title":"Default Title","offer_id":54097173151939,"sku":"600-0008","price":1022.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/600-0008_00c8e48c-84e7-4211-9713-2cb0a41ea3c9.png?v=1791327032"},{"product_id":"petersen-pete-300-dairy-feedlot-fountain-600-0009","title":"Petersen PETE #300 Dairy and Feedlot Fountain 600-0009","description":"\u003cp\u003eThe PETE #300 steps up to a 66 inch body holding 30 gallons for up to 300 head, with a 1,000 watt element behind it.\u003c\/p\u003e\u003cp\u003ePetersen pours these in 5,000 PSI black painted concrete reinforced with 3\/8 inch welded rebar cages. The black finish picks up solar heat and the body carries up to 2 inches of extruded polystyrene insulation, which is what keeps the winter bill down. The concrete is air entrained and designed for expansion and contraction, so freeze and thaw is not working the unit apart. The weight means no bolting down.\u003c\/p\u003e\u003cp\u003eHeat is 1,000 watt at 120V, or you can run it Free-Flo with a thermostatically controlled trickle valve instead of an element. A no heat version is available on request. Hook up is straightforward for both the pipeline and the electric.\u003c\/p\u003e\u003cp\u003e66 in L x 28 in W x 26 in H, 1650 pounds, 30 gallons.\u003c\/p\u003e","brand":"Petersen","offers":[{"title":"Default Title","offer_id":54097173184707,"sku":"600-0009","price":1127.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/600-0009_06c231c6-bbc9-4154-8ef8-00a7a3f27d18.png?v=1791327033"},{"product_id":"petersen-pete-350-dairy-feedlot-fountain-600-0010","title":"Petersen PETE #350 Dairy and Feedlot Fountain 600-0010","description":"\u003cp\u003eThe PETE #350 shares the 66 inch body and 30 gallon capacity of the #300 for up to 300 head, in the next step up the dairy and feedlot line.\u003c\/p\u003e\u003cp\u003ePetersen pours these in 5,000 PSI black painted concrete reinforced with 3\/8 inch welded rebar cages. The black finish picks up solar heat and the body carries up to 2 inches of extruded polystyrene insulation, which is what keeps the winter bill down. The concrete is air entrained and designed for expansion and contraction, so freeze and thaw is not working the unit apart. The weight means no bolting down.\u003c\/p\u003e\u003cp\u003eHeat is 1,000 watt, or you can run it Free-Flo with a thermostatically controlled trickle valve instead of an element. A no heat version is available on request. Hook up is straightforward for both the pipeline and the electric.\u003c\/p\u003e\u003cp\u003e66 in L x 28 in W x 26 in H, 1650 pounds, 30 gallons.\u003c\/p\u003e","brand":"Petersen","offers":[{"title":"Default Title","offer_id":54097173217475,"sku":"600-0010","price":1167.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/600-0010_bb009b99-7ef4-4c6e-a9e4-b2d493cb6d93.png?v=1791327035"},{"product_id":"petersen-pete-400-dairy-feedlot-fountain-600-0011","title":"Petersen PETE #400 Dairy and Feedlot Fountain 600-0011","description":"\u003cp\u003eThe PETE #400 is the two sided dairy fountain, 86 inches of body holding 45 gallons for up to 400 head.\u003c\/p\u003e\u003cp\u003ePetersen pours these in 5,000 PSI black painted concrete reinforced with 3\/8 inch welded rebar cages. The black finish picks up solar heat and the body carries up to 2 inches of extruded polystyrene insulation, which is what keeps the winter bill down. The concrete is air entrained and designed for expansion and contraction, so freeze and thaw is not working the unit apart. The weight means no bolting down.\u003c\/p\u003e\u003cp\u003eHeat is 1,000 watt, or you can run it Free-Flo with a thermostatically controlled trickle valve instead of an element. A no heat version is available on request. Hook up is straightforward for both the pipeline and the electric.\u003c\/p\u003e\u003cp\u003e86 in L x 28 in W x 26 in H, 2000 pounds, 45 gallons.\u003c\/p\u003e","brand":"Petersen","offers":[{"title":"Default Title","offer_id":54097173250243,"sku":"600-0011","price":1228.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/600-0011_1c68e021-57c6-4768-b165-ffecba2219bc.png?v=1791327036"},{"product_id":"petersen-pete-450-dairy-feedlot-fountain-600-0012","title":"Petersen PETE #450 Dairy and Feedlot Fountain 600-0012","description":"\u003cp\u003eThe PETE #450 holds 45 gallons in an 86 inch body for up to 400 head, the larger of the two 86 inch fountains in the line.\u003c\/p\u003e\u003cp\u003ePetersen pours these in 5,000 PSI black painted concrete reinforced with 3\/8 inch welded rebar cages. The black finish picks up solar heat and the body carries up to 2 inches of extruded polystyrene insulation, which is what keeps the winter bill down. The concrete is air entrained and built for expansion and contraction, so freeze and thaw is not working the unit apart. The weight means no bolting down.\u003c\/p\u003e\u003cp\u003eHeat is 1,000 watt, or you can run it Free-Flo with a thermostatically controlled trickle valve instead of an element. A no heat version is available on request.\u003c\/p\u003e\u003cp\u003e86 in L x 28 in W x 26 in H, 2000 pounds, 45 gallons.\u003c\/p\u003e","brand":"Petersen","offers":[{"title":"Default Title","offer_id":54097177247939,"sku":"600-0012","price":1275.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/600-0012_29e11b28-2e68-4fc7-9b27-8ce12a014271.png?v=1791328719"},{"product_id":"petersen-pete-500-dairy-feedlot-fountain-600-0013","title":"Petersen PETE #500 Dairy and Feedlot Fountain 600-0013","description":"\u003cp\u003eThe PETE #500 is the all purpose fountain, 70 gallons in a short wide 55 by 37 inch body for up to 500 head. The width puts more animals at the water without stretching down a fence line.\u003c\/p\u003e\u003cp\u003ePetersen pours these in 5,000 PSI black painted concrete reinforced with 3\/8 inch welded rebar cages. The black finish picks up solar heat and the body carries up to 2 inches of extruded polystyrene insulation, which is what keeps the winter bill down. The concrete is air entrained and built for expansion and contraction, so freeze and thaw is not working the unit apart. The weight means no bolting down.\u003c\/p\u003e\u003cp\u003eHeat is 1,200 watt, or you can run it Free-Flo with a thermostatically controlled trickle valve instead of an element. A no heat version is available on request.\u003c\/p\u003e\u003cp\u003e55 in L x 37 in W x 26 in H, 2150 pounds, 70 gallons.\u003c\/p\u003e","brand":"Petersen","offers":[{"title":"Default Title","offer_id":54097177280707,"sku":"600-0013","price":1363.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/600-0013_0878d1ba-1b4d-4bbc-a071-276ebade20c8.png?v=1791328724"},{"product_id":"petersen-pete-650-dairy-feedlot-fountain-600-0014","title":"Petersen PETE #650 Dairy and Feedlot Fountain 600-0014","description":"\u003cp\u003eThe PETE #650 is the long narrow fountain, 114 inches of trough only 21 inches wide for up to 400 head. It suits a fence line run where width is the thing you do not have.\u003c\/p\u003e\u003cp\u003ePetersen pours these in 5,000 PSI black painted concrete reinforced with 3\/8 inch welded rebar cages. The black finish picks up solar heat and the body carries up to 2 inches of extruded polystyrene insulation, which is what keeps the winter bill down. The concrete is air entrained and built for expansion and contraction, so freeze and thaw is not working the unit apart. The weight means no bolting down.\u003c\/p\u003e\u003cp\u003eHeat is 1,000 watt, or you can run it Free-Flo with a thermostatically controlled trickle valve instead of an element. A no heat version is available on request.\u003c\/p\u003e\u003cp\u003e114 in L x 21 in W x 24 in H, 2000 pounds, 30 gallons.\u003c\/p\u003e","brand":"Petersen","offers":[{"title":"Default Title","offer_id":54097177313475,"sku":"600-0014","price":1339.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/600-0014_f24ae92b-b227-4e7f-9a9d-948cccdc534b.png?v=1791328729"},{"product_id":"petersen-pete-700-dairy-feedlot-fountain-600-0015","title":"Petersen PETE #700 Dairy and Feedlot Fountain 600-0015","description":"\u003cp\u003eThe PETE #700 carries 110 gallons in a 60 by 44 inch body. The reserve is the point: a big draw at the end of a hot day does not run it down.\u003c\/p\u003e\u003cp\u003ePetersen pours these in 5,000 PSI black painted concrete reinforced with 3\/8 inch welded rebar cages. The black finish picks up solar heat and the body carries up to 2 inches of extruded polystyrene insulation, which is what keeps the winter bill down. The concrete is air entrained and built for expansion and contraction, so freeze and thaw is not working the unit apart. The weight means no bolting down.\u003c\/p\u003e\u003cp\u003eHeat is 1,200 watt, or you can run it Free-Flo with a thermostatically controlled trickle valve instead of an element. A no heat version is available on request.\u003c\/p\u003e\u003cp\u003e60 in L x 44 in W x 26 in H, 2430 pounds, 110 gallons.\u003c\/p\u003e","brand":"Petersen","offers":[{"title":"Default Title","offer_id":54097177346243,"sku":"600-0015","price":1432.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/600-0015_d45391f9-b9ba-47d3-899f-2c837d7f9de0.png?v=1791328733"},{"product_id":"petersen-pete-800-dairy-feedlot-fountain-600-0016","title":"Petersen PETE #800 Dairy and Feedlot Fountain 600-0016","description":"\u003cp\u003eThe PETE #800 is the largest fountain Petersen builds, 210 gallons in a 95 by 44 inch body for up to 500 head. At 3,000 pounds it is a permanent fixture in the yard.\u003c\/p\u003e\u003cp\u003ePetersen pours these in 5,000 PSI black painted concrete reinforced with 3\/8 inch welded rebar cages. The black finish picks up solar heat and the body carries up to 2 inches of extruded polystyrene insulation, which is what keeps the winter bill down. The concrete is air entrained and built for expansion and contraction, so freeze and thaw is not working the unit apart. The weight means no bolting down.\u003c\/p\u003e\u003cp\u003eHeat is 1,200 watt, or you can run it Free-Flo with a thermostatically controlled trickle valve instead of an element. A no heat version is available on request.\u003c\/p\u003e\u003cp\u003e95 in L x 44 in W x 26 in H, 3000 pounds, 210 gallons.\u003c\/p\u003e","brand":"Petersen","offers":[{"title":"Default Title","offer_id":54097177379011,"sku":"600-0016","price":1796.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/600-0016_c8b54b37-251b-45f3-981d-00412ba3b612.png?v=1791328739"},{"product_id":"petersen-pete-74h-dairy-feedlot-fountain-600-0017","title":"Petersen PETE #74H Dairy and Feedlot Fountain 600-0017","description":"\u003cp\u003eThe PETE #74H is the tall version of the 74 inch trough, standing 24 inches rather than 15. It holds 25 gallons and is rated for 60 head.\u003c\/p\u003e\u003cp\u003ePetersen pours these in 5,000 PSI black painted concrete reinforced with 3\/8 inch welded rebar cages. The black finish picks up solar heat and the body carries up to 2 inches of extruded polystyrene insulation, which is what keeps the winter bill down. The concrete is air entrained and built for expansion and contraction, so freeze and thaw is not working the unit apart. The weight means no bolting down.\u003c\/p\u003e\u003cp\u003eHeat is 1,000 watt, or you can run it Free-Flo with a thermostatically controlled trickle valve instead of an element. A no heat version is available on request.\u003c\/p\u003e\u003cp\u003e75 in L x 22 in W x 24 in H, 1400 pounds, 25 gallons.\u003c\/p\u003e","brand":"Petersen","offers":[{"title":"Default Title","offer_id":54097177411779,"sku":"600-0017","price":1089.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/600-0017_559e00d5-f210-4042-9e19-26c196f2701e.png?v=1791328744"},{"product_id":"petersen-pete-120h-dairy-feedlot-fountain-600-0018","title":"Petersen PETE #120H Dairy and Feedlot Fountain 600-0018","description":"\u003cp\u003eThe PETE #120H is the tall 121 inch fountain, 24 inches high and 22 wide, holding 40 gallons for up to 300 head. It is the taller companion to the 120S.\u003c\/p\u003e\u003cp\u003ePetersen pours these in 5,000 PSI black painted concrete reinforced with 3\/8 inch welded rebar cages. The black finish picks up solar heat and the body carries up to 2 inches of extruded polystyrene insulation, which is what keeps the winter bill down. The concrete is air entrained and built for expansion and contraction, so freeze and thaw is not working the unit apart. The weight means no bolting down.\u003c\/p\u003e\u003cp\u003eHeat is 1,000 watt at 120V, or you can run it Free-Flo with a thermostatically controlled trickle valve instead of an element. A no heat version is available on request.\u003c\/p\u003e\u003cp\u003e121 in L x 22 in W x 24 in H, 2275 pounds, 40 gallons.\u003c\/p\u003e","brand":"Petersen","offers":[{"title":"Default Title","offer_id":54097177444547,"sku":"600-0018","price":1275.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/600-0018_d453c280-a535-41d7-8e89-24e9afa7483b.png?v=1791328749"},{"product_id":"petersen-pete-144-dairy-feedlot-fountain-600-0019","title":"Petersen PETE #144 Dairy and Feedlot Fountain 600-0019","description":"\u003cp\u003eThe PETE #144 is the longest trough Petersen builds, 144 inches at 24 inches tall holding 55 gallons for up to 350 head. Twelve feet of drinking space off one water line.\u003c\/p\u003e\n\u003cp\u003ePetersen pours these in 5,000 PSI black-painted concrete, reinforced with 3\/8-inch welded rebar cages. The black finish picks up solar heat, and the body carries up to 2 inches of extruded polystyrene insulation, which is what keeps the winter bill down. The concrete is air-entrained and built for expansion and contraction, so freeze and thaw won't tear the unit apart. The weight means no bolting down.\u003c\/p\u003e\n\u003cp\u003eHeat is 1,000 watt at 120V, or you can run it Free-Flo with a thermostatically controlled trickle valve instead of an element. A no-heat version is available on request.\u003c\/p\u003e\n\u003cp\u003e144 in L x 22 in W x 24 in H, 3000 pounds, 55 gallons.\u003c\/p\u003e","brand":"Petersen","offers":[{"title":"Default Title","offer_id":54097177477315,"sku":"600-0019","price":1787.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/144.png?v=1791384393"},{"product_id":"petersen-pete-120s-small-cattle-sheep-fountain-600-0030","title":"Petersen PETE #120S Small Cattle and Sheep Fountain 600-0030","description":"\u003cp\u003eThe PETE #120S is the long low profile fountain, 120 inches of trough standing only 15 inches tall so sheep and smaller cattle reach it without a step. It holds 50 gallons for up to 400 head.\u003c\/p\u003e\u003cp\u003ePetersen pours these in 5,000 PSI black painted concrete reinforced with 3\/8 inch welded rebar cages. The black finish picks up solar heat and the body carries up to 2 inches of extruded polystyrene insulation, which is what keeps the winter bill down. The concrete is air entrained and built for expansion and contraction, so freeze and thaw is not working the unit apart. The weight means no bolting down.\u003c\/p\u003e\u003cp\u003eHeat is 1,000 watt, 120V or 240V, or you can run it Free-Flo with a thermostatically controlled trickle valve instead of an element. A no heat version is available on request.\u003c\/p\u003e\u003cp\u003e120 in L x 21 in W x 15 in H, 2100 pounds, 50 gallons.\u003c\/p\u003e","brand":"Petersen","offers":[{"title":"Default Title","offer_id":54097177510083,"sku":"600-0030","price":1084.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/600-0030_9a5c55ee-4b4c-4814-9175-170a088e5eb5.png?v=1791328792"},{"product_id":"petersen-pete-494s-feedlot-fountain-600-0033","title":"Petersen PETE #494S Small Cattle and Sheep Feedlot Fountain 600-0033","description":"\u003cp\u003eThe PETE #494S is the wide 94 inch low profile fountain, 24 inches across holding 45 gallons for up to 400 head, at the 15 inch height that suits sheep and smaller cattle.\u003c\/p\u003e\u003cp\u003ePetersen pours these in 5,000 PSI black painted concrete reinforced with 3\/8 inch welded rebar cages. The black finish picks up solar heat and the body carries up to 2 inches of extruded polystyrene insulation, which is what keeps the winter bill down. The concrete is air entrained and built for expansion and contraction, so freeze and thaw is not working the unit apart. The weight means no bolting down.\u003c\/p\u003e\u003cp\u003eHeat is 1,000 watt, 120V or 240V, or you can run it Free-Flo with a thermostatically controlled trickle valve instead of an element. A no heat version is available on request.\u003c\/p\u003e\u003cp\u003e94 in L x 24 in W x 15 in H, 1800 pounds, 45 gallons.\u003c\/p\u003e","brand":"Petersen","offers":[{"title":"Default Title","offer_id":54097177542851,"sku":"600-0033","price":1190.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/600-0033_a6e57e24-5318-4dd6-b640-0f0536e9e945.png?v=1791328798"},{"product_id":"petersen-super-pete-94e-cattle-waterer-600-0069","title":"Petersen Super PETE 94E Cattle Waterer 600-0069","description":"\u003cp\u003eThe Super PETE 94E is the feedlot and dairy unit of the Super PETE line, a 94 inch body holding 38 gallons for up to 425 head.\u003c\/p\u003e\u003cp\u003ePetersen pours it in 5,000 PSI black painted concrete reinforced with 3\/8 inch welded rebar cages, with 2 inches of extruded polystyrene insulation. The plastic doors and valve covers will not rust, the float chamber is large and deep, the drains are 3 inch self cleaning, and the rounded hood sheds snow and ice instead of collecting it. The weight means no bolting down.\u003c\/p\u003e\u003cp\u003eHeat is 1,000 watt, 120V or 240V, or you can run it Free-Flo with a thermostatically controlled trickle valve instead of an element. A no heat version is available on request.\u003c\/p\u003e\u003cp\u003e94 in L x 30 in W x 25 in H, 2400 pounds, 38 gallons.\u003c\/p\u003e","brand":"Petersen","offers":[{"title":"Default Title","offer_id":54097177575619,"sku":"600-0069","price":1313.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/600-0069_c5abd718-ddca-43e8-8067-8118c3f00885.png?v=1791328801"},{"product_id":"petersen-super-pete-74c-dairy-feedlot-waterer-600-0070","title":"Petersen Super PETE 74C Dairy and Feedlot Waterer 600-0070","description":"\u003cp\u003eThe Super PETE 74C sits between the 44 and the 94 in the Super PETE line, a 74 inch body holding 25 gallons for up to 350 head.\u003c\/p\u003e\u003cp\u003ePetersen pours it in 5,000 PSI black painted concrete reinforced with 3\/8 inch welded rebar cages, with 2 inches of extruded polystyrene insulation. The plastic doors and valve covers will not rust, the float chamber is large and deep, the drains are 3 inch self cleaning, and the rounded hood sheds snow and ice instead of collecting it. The weight means no bolting down.\u003c\/p\u003e\u003cp\u003eHeat is 1,000 watt, 120V or 240V, or you can run it Free-Flo with a thermostatically controlled trickle valve instead of an element. A no heat version is available on request.\u003c\/p\u003e\u003cp\u003e74 in L x 30 in W x 25 in H, 2000 pounds, 25 gallons.\u003c\/p\u003e","brand":"Petersen","offers":[{"title":"Default Title","offer_id":54097177608387,"sku":"600-0070","price":1177.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/600-0070_72d3f364-df9e-48df-a286-d7658c89a387.png?v=1791328806"},{"product_id":"petersen-super-pete-74e-dairy-feedlot-waterer-600-0074","title":"Petersen Super PETE 74E Dairy and Feedlot Waterer 600-0074","description":"\u003cp\u003eThe Super PETE 74E is the 74 inch dairy and feedlot waterer, 25 gallons for up to 350 head, built on the same body as the 74C.\u003c\/p\u003e\u003cp\u003ePetersen pours it in 5,000 PSI black painted concrete reinforced with 3\/8 inch welded rebar cages, with 2 inches of extruded polystyrene insulation. The plastic doors and valve covers will not rust, the float chamber is large and deep, the drains are 3 inch self cleaning, and the rounded hood sheds snow and ice instead of collecting it. The weight means no bolting down.\u003c\/p\u003e\u003cp\u003eHeat is 1,000 watt, or you can run it Free-Flo with a thermostatically controlled trickle valve instead of an element. A no heat version is available on request.\u003c\/p\u003e\u003cp\u003e74 in L x 30 in W x 25 in H, 2000 pounds, 25 gallons.\u003c\/p\u003e","brand":"Petersen","offers":[{"title":"Default Title","offer_id":54097177641155,"sku":"600-0074","price":1177.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/600-0074_2bad366a-3454-47b5-8b52-a0c5ef591610.png?v=1791328811"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/collections\/petersen.jpg?v=1789752691","url":"https:\/\/www.petecosupply.com\/collections\/petersen-concrete-waterers.oembed","provider":"PeteCo Supply, LLC. ","version":"1.0","type":"link"}