{"title":"Miraco MiraFount 3350 Parts Breakdown","description":"\u003cp\u003eThe four-hole MiraFount 3350 waters a large group on demand and every part here fits that unit. The breakdown covers valve assemblies for the inner trough, outer fill pipes, top and replacement gaskets, inspection plugs, drain plugs, parts bags and the anchor bolts and washers used to set it. Order the part number and keep all four holes running.\u003c\/p\u003e","products":[{"product_id":"farm-innovators-submergible-stock-tank-de-icer-1000w-h-409","title":"Farm Innovators Cast Aluminum Submergible Stock Tank De-Icer 1000W H-409","description":"\u003cp\u003eThe Farm Innovators H-409 is a 1000 watt submergible de-icer for stock tanks, sized for a tank holding up to about 100 gallons. The patented cast aluminum body carries heat out into the water efficiently, and the unit is heavy enough to sink and stay where you set it on the bottom of the tank.\u003c\/p\u003e\u003cp\u003eThe thermostat inside does the thinking for you. It brings the element on as the water approaches freezing, right around 35 degrees, and shuts it back off near 45 degrees, so you are not paying to heat water that is already open. The cord comes wrapped in a heavy duty anti-chew protector, which matters a great deal if you have horses or curious calves around the tank.\u003c\/p\u003e\u003cp\u003eThis de-icer is safe to use in a plastic tank. Farm Innovators tests it in plastic, in structural foam and in pond liners to UL specifications, so it works in a poly tank the same as it does in galvanized steel. It carries a three year guarantee.\u003c\/p\u003e\u003cp\u003eTwo habits will get you years out of one of these. Lift it out and clean the element about every 30 days, because lime and scale building up on the element is the most common reason a de-icer burns out, and white vinegar and water, Lime-Away or CLR will all take it off. Plug it straight into a grounded outlet rather than into an extension cord, and ground the tank itself. If your tank holds more than 250 gallons, a TC-3 ThermoCube on the outlet will cycle the de-icer with the outdoor temperature and save you some power.\u003c\/p\u003e","brand":"Farm Innovators","offers":[{"title":"Default Title","offer_id":44267714871491,"sku":"12310540","price":74.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/h-409.png?v=1791479590"},{"product_id":"miraco-1-4-x-1-h-h-s-s-bolt-package-part-number-545","title":"Miraco 1\/4\" x 1\" H.H. S.S. Bolt package part number 545","description":"\u003cp\u003eReplacement stainless steel bolts for Miraco lid bracket part number 544. Fount in multiple Miraco style units.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShown on the parts breakdowns for these Miraco models:\u003c\/strong\u003e 3310, 3310-4, 3310-S, 3330, 3330E, 3350, 3360, 3360-10, 3410, 3410-4, 3410-4E, 3410E, 6000. If you are not sure which unit you have, open the breakdown for your model and it lists every part that fits it.\u003c\/p\u003e","brand":"Miraco","offers":[{"title":"Default Title","offer_id":44267726340291,"sku":"545","price":0.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/miraco_545.jpg?v=1788998391"},{"product_id":"miraco-10-drinker-ball-part-number-571","title":"Miraco 10\" Drinker Ball, Part number 571","description":"\u003cp\u003eMiraco Replacement fully insulated drinker ball with a 10\" diameter.  Give added protection to your water supply against wind and cold.\u003c\/p\u003e\u003cdiv style=\"border-left:4px solid #b9902a;background:#fdf8e9;padding:16px 18px;margin:18px 0;border-radius:4px;\"\u003e\n\u003cp style=\"margin:0 0 8px;font-weight:700;color:#8a6a1f;\"\u003eTIP\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:0.95em;line-height:1.55;\"\u003eTo help ensure you have the correct size, the 10\" drinker balls have a BLUE PLUG.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eUsed in the following Miraco Units:\u003c\/p\u003e\u003cp\u003eModel 3330 - Mirafount and E-Fount\u003c\/p\u003e\u003cp\u003eModel 3350 - Mirafount and E-Fount\u003c\/p\u003e\u003cp\u003eModel 3360 - Mirafount and E-Fount\u003c\/p\u003e\u003cp\u003eModel 3465 - Mirafount and E-Fount\u003c\/p\u003e","brand":"Miraco","offers":[{"title":"Default Title","offer_id":44267726438595,"sku":"571","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/571_Drinker_ball_blue_plug.jpg?v=1788998392"},{"product_id":"miraco-2-inch-rubber-drain-plug-part-number-322","title":"Miraco 2 inch Rubber Drain Plug, Part number 322","description":"\u003cp\u003eThe Miraco 2\" drain plug is made of solid, durable rubber. This drain plug is found in the ball designed units of Miraco Livestock waterers and can be removed for easy cleaning of the trough.  The ball series waterers are from the Miraco families, Mirafount and E-fount.  \u003c\/p\u003e\u003cp\u003eMiraco Part number 322.\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Miraco","offers":[{"title":"Default Title","offer_id":44267726569667,"sku":"322","price":6.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/4275414925.jpg?v=1740709598"},{"product_id":"miraco-2-flex-hose-package-156","title":"Miraco 2\" flex hose package #156","description":"\u003cp\u003eMiraco replacement 2' flex hose for automatic waterers. This flex hose connects from your shut-off valve to the elbow in your Miraco automatic waterer. The package includes a 2-foot hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShown on the parts breakdowns for these Miraco models:\u003c\/strong\u003e 3310-S, 3330, 3330E, 3340, 3340E, 3345, 3345E, 3350, 3354-S, 3354SE, 3360, 3370-S, 3390, 3390E, 3410-4, 3410-4E, 3465, 3465E. If you are not sure which unit you have, open the breakdown for your model and it lists every part that fits it.\u003c\/p\u003e","brand":"Miraco","offers":[{"title":"Default Title","offer_id":44267726635203,"sku":"156","price":19.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/4694518480.jpg?v=1740709599"},{"product_id":"miraco-3-4-inch-custom-elbow-part-672","title":"Miraco 3\/4 inch Custom Elbow part 672","description":"\u003cp\u003eReplacement 3\/4\" custom elbow for Miraco automatic waterers, part number 672.  Made of high-density poly with molded hose barb end for a secure connection to your waterline.  \u003c\/p\u003e\u003cp\u003eThe Custom Elbow securely fits in the Outer Fill Assembly and the 521 valve will screw directly into the fitting for easy installation.  Pipe tape can be used for added leak protection. \u003c\/p\u003e","brand":"Miraco","offers":[{"title":"Default Title","offer_id":44267727159491,"sku":"672","price":6.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/2503337695.jpg?v=1740709624"},{"product_id":"miraco-3-4-male-x-barb-fitting-396","title":"Miraco 3\/4\" Male x barb fitting #396","description":"\u003cp\u003e3\/4\" male x barb fitting replacement part for Miraco waterers.\u003c\/p\u003e\u003cp\u003eMiraco part number 396 is found in package 156 that is used in the hog waterer, model 3410-4.\u003c\/p\u003e\u003cp\u003e(Please note - the parts breakdown for the 3410-4 indicates part 296. The correct part number is 396)\u003c\/p\u003e","brand":"Miraco","offers":[{"title":"Default Title","offer_id":44267727323331,"sku":"396","price":3.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/1004819117.jpg?v=1740709628"},{"product_id":"miraco-3-8-s-s-washer-part-number-351","title":"Miraco 3\/8\" S.S. Washer Part number 351","description":"\u003cp\u003eWasher used with the Miraco anchor bolts. Manufactured of Stainless Steel for long life.  \u003c\/p\u003e\u003cp\u003eAnchor bolts are sold separately and are designed to secure the automatic waterer to the concrete pad. Use the washers when moving the existing unit. \u003c\/p\u003e","brand":"Miraco","offers":[{"title":"Default Title","offer_id":44267727421635,"sku":"351","price":0.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/Miraco_Part_351_SS_Washer.jpg?v=1787971567"},{"product_id":"miraco-3-8-stainless-steel-nut-699","title":"Miraco 3\/8\" Stainless Steel Nut #699","description":"\u003cp\u003eMiraco replacement 3\/8\" stainless steel nut. Used in the 3410-4 hog waterers and is included in the parts package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShown on the parts breakdowns for these Miraco models:\u003c\/strong\u003e 2700, 2800, 2900, 3000, 3100, 3200, 3310, 3310-4, 3310-S, 3330, 3330E, 3340, 3340E, 3345, 3345E, 3350, 3354-S, 3354SE, 3360, 3360-10, 3370-S, 3390, 3390E, 3410, 3410-4, 3410-4E, 3410E, 3465, 3465E, 3500, 6200, 6300, 6400, 6500. If you are not sure which unit you have, open the breakdown for your model and it lists every part that fits it.\u003c\/p\u003e","brand":"Miraco","offers":[{"title":"Default Title","offer_id":44267727454403,"sku":"699","price":0.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/699.jpg?v=1790368177"},{"product_id":"miraco-3-8-x-3-3-4-s-s-anchor-bolts-344","title":"Miraco 3\/8\" x 3 3\/4\" S.S. Anchor Bolts #344","description":"\u003cp\u003eMiraco anchor bolts (standard with waterers). Each anchor bolt is 3\/8\" by 3 3\/4\" and stainless steel for long life and to protect against corrosion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShown on the parts breakdowns for these Miraco models:\u003c\/strong\u003e 2700, 2800, 2900, 3000, 3100, 3200, 3310, 3310-4, 3310-S, 3330, 3330E, 3340, 3340E, 3345, 3345E, 3350, 3354-S, 3354SE, 3360, 3360-10, 3370-S, 3390, 3390E, 3410, 3410-4, 3410-4E, 3410E, 3465, 3465E, 3500, 6200, 6300, 6400, 6500. If you are not sure which unit you have, open the breakdown for your model and it lists every part that fits it.\u003c\/p\u003e","brand":"Miraco","offers":[{"title":"Default Title","offer_id":44267727487171,"sku":"344","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/344_anchor_bolt.jpg?v=1790350329"},{"product_id":"miraco-3350-parts-bag-a466","title":"Miraco 3350 Parts Bag A466","description":"\u003cp\u003eReplacement parts bag for the Miraco E-Fount 3350.  This parts bag will contain all of the Miraco Parts needed to install a used 3350 or move your Miraco Waterer. \u003c\/p\u003e\u003cp\u003ePackage includes:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e306  - 5\/16\" x 2\" S.S. Bolt\u003c\/li\u003e\n\u003cli\u003e322 - 2\" rubber drain plug\u003c\/li\u003e\n\u003cli\u003e344 - 3\/8\" x 3 3\/4\" S.S. Anchor bolt\u003c\/li\u003e\n\u003cli\u003e351 - 3\/8\" S.S. Washer\u003c\/li\u003e\n\u003cli\u003e352 - 5\/16\" x 1\" Stainless steel bolt\u003c\/li\u003e\n\u003cli\u003e353 - Anchor Clip\u003c\/li\u003e\n\u003cli\u003e699 - 3\/8\" stainless steel nut\u003c\/li\u003e\n\u003cli\u003e426 - Bottom Gasket 115\"\u003c\/li\u003e\n\u003cli\u003e440 - Valve Assembly\u003c\/li\u003e\n\u003cli\u003e661 - Float Assembly\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Miraco","offers":[{"title":"Default Title","offer_id":44267727782083,"sku":"A466","price":170.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/3350_parts_bag_part_466_2d909bbe-6a48-4837-86d8-7ff7b095b890.png?v=1791059552"},{"product_id":"miraco-3350-top-assembly-complete-518","title":"Miraco 3350 Top Assembly Complete 518","description":"\u003cp\u003eReplacement top for the heated Miraco 3350 square automatic waterer.  This assembly includes the entire top black portion of the waterer: Top, bolts and washers, dome and gaskets.  The assembly comes complete to update your existing waterer.  \u003c\/p\u003e\u003cp\u003eThe following part numbers are included:\u003c\/p\u003e\u003cp\u003e518 - complete assembly\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e460 - Top Gasket 120\"\u003c\/li\u003e\n\u003cli\u003e544 - Lid Bracket \u003c\/li\u003e\n\u003cli\u003e545 - 1\/4\" x 1\" S.S. Bolt\u003c\/li\u003e\n\u003cli\u003e604-5 Inspection plug short\u003c\/li\u003e\n\u003cli\u003e712 Inspection plug gasket\u003c\/li\u003e\n\u003cli\u003e425 Anti Syphon Device\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Miraco","offers":[{"title":"Default Title","offer_id":44267727814851,"sku":"518","price":280.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/sq_0493cf2e-ca1d-4848-957d-9fb659ca3f7d.jpg?v=1790700224"},{"product_id":"miraco-342-nylon-rachet","title":"Miraco 342 Nylon Rachet","description":"\u003cp\u003eThe Miraco Nylon Rachet is found in all Miraco automatic waterers except for the stall units. This piece attaches to the end of the float hardware and connects with the valve cam using the brass thumbscrew, part 343.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShown on the parts breakdowns for these Miraco models:\u003c\/strong\u003e 2700, 2800, 2900, 3000, 3100, 3200, 3310, 3310-4, 3310-S, 3320, 3320-1, 3321-1, 3330, 3330E, 3340, 3340E, 3345, 3345E, 3350, 3354-S, 3354SE, 3360, 3360-10, 3370-S, 3390, 3390E, 3410, 3410-4, 3410-4E, 3410E, 3465, 3465E, 3500, 6000, 6100, 6200, 6300, 6400, 6500. If you are not sure which unit you have, open the breakdown for your model and it lists every part that fits it.\u003c\/p\u003e","brand":"Miraco","offers":[{"title":"Default Title","offer_id":44267728142531,"sku":"342","price":2.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/342Miraco.jpg?v=1788998394"},{"product_id":"miraco-343-brass-thumb-screw","title":"Miraco 343 Brass Thumb Screw","description":"\u003cp\u003eBrass thumb screw replacement, part number 343 for Miraco automatic waterers. Found with all Miraco Float assemblies.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShown on the parts breakdowns for these Miraco models:\u003c\/strong\u003e 2700, 2800, 2900, 3000, 3100, 3200, 3310, 3310-4, 3310-S, 3320, 3320-1, 3321-1, 3330, 3330E, 3340, 3340E, 3345, 3345E, 3350, 3354-S, 3354SE, 3360, 3360-10, 3370-S, 3390, 3390E, 3410, 3410-4, 3410-4E, 3410E, 3465, 3465E, 3500, 6000, 6100, 6200, 6300, 6400, 6500. If you are not sure which unit you have, open the breakdown for your model and it lists every part that fits it.\u003c\/p\u003e","brand":"Miraco","offers":[{"title":"Default Title","offer_id":44267728437443,"sku":"343","price":1.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/343brassthumbscrew.jpg?v=1788998395"},{"product_id":"miraco-345-bob-float-4-x-4","title":"Miraco 345 bob float 4\" x 4\"","description":"\u003cp\u003eMiraco 4\" x 4\" bob float replacement only. The bob float is found in all Miraco Ground mounted units and replaces the older style round float. Now equipped with a brass insert for longevity. \u003c\/p\u003e\u003cp\u003ePair with replacement float arm assemblies to regulate the water level in your Miraco automatic waterer.  Part number 345 is made of poly with a brass, threaded insert and is interchangeable with the older hardware however updating the hardware is recommended.  \u003cbr\u003e\u003c\/p\u003e","brand":"Miraco","offers":[{"title":"Default Title","offer_id":44267728502979,"sku":"345","price":12.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/miraco345bobfloat.jpg?v=1788998396"},{"product_id":"miraco-4-male-adapter-part-number-409","title":"Miraco 4\" Male Adapter, part number 409","description":"\u003cp\u003ePart number 409 is a 4\" male adapter found in the 3410-4 Miraco Hog Waterers. It's included in the full base assembly, part number 838.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShown on the parts breakdowns for these Miraco models:\u003c\/strong\u003e 3310-S, 3330, 3330E, 3345, 3345E, 3350, 3354-S, 3354SE, 3360, 3370-S, 3390, 3390E, 3410-4, 3410-4E, 3465, 3465E. If you are not sure which unit you have, open the breakdown for your model and it lists every part that fits it.\u003c\/p\u003e","brand":"Miraco","offers":[{"title":"Default Title","offer_id":44267728666819,"sku":"409","price":24.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/409_miraco.jpg?v=1788998396"},{"product_id":"miraco-440-valve-assembly","title":"Miraco 440 Valve Assembly","description":"\u003cp\u003eMiraco replacement 521 and 3\/4\" custom elbow all in one package, Valve Assembly part number 440.  This assembly is used in Miraco Waterers that feature the ball closures manufactured AFTER 2016.  \u003c\/p\u003e\u003cp\u003eThe 521 Valve handles pressures between 40-80 PSI.  Any water pressures higher than 80 require a pressure regulator on the line.\u003c\/p\u003e","brand":"Miraco","offers":[{"title":"Default Title","offer_id":44267728797891,"sku":"440","price":27.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/4698588125.jpg?v=1740709678"},{"product_id":"miraco-507-valve-cap-for-older-style-blue-valve","title":"Miraco 507 Valve Cap for older style Blue Valve","description":"\u003cp\u003eReplacement valve cap for the Blue Miraco Valves. The blue 521 valves are the older style valves that have a two piece base and a pressure rating of 40-80 PSI.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShown on the parts breakdowns for these Miraco models:\u003c\/strong\u003e 2700, 2800, 2900, 3000, 3100, 3200, 3310, 3310-4, 3310-S, 3320, 3320-1, 3321-1, 3330, 3330E, 3340, 3340E, 3345, 3345E, 3350, 3354-S, 3354SE, 3360, 3360-10, 3370-S, 3390, 3390E, 3410, 3410-4, 3410-4E, 3410E, 3465, 3465E, 3500. If you are not sure which unit you have, open the breakdown for your model and it lists every part that fits it.\u003c\/p\u003e","brand":"Miraco","offers":[{"title":"Default Title","offer_id":44267729158339,"sku":"507","price":2.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/507.png?v=1790788143"},{"product_id":"miraco-507g-valve-cap-for-new-style-grey-valve","title":"Miraco 507G Valve Cap for new style Grey Valve","description":"\u003cp\u003eReplacement valve cap for the Grey Miraco Valves. The blue 521 valves are the new style valves that have a two piece base and a pressure rating of 40-80 PSI.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShown on the parts breakdowns for these Miraco models:\u003c\/strong\u003e 2700, 2800, 2900, 3000, 3100, 3200, 3310, 3310-4, 3310-S, 3320, 3320-1, 3321-1, 3330, 3330E, 3340, 3340E, 3345, 3345E, 3350, 3354-S, 3354SE, 3360, 3360-10, 3370-S, 3390, 3390E, 3410, 3410-4, 3410-4E, 3410E, 3465, 3465E, 3500. If you are not sure which unit you have, open the breakdown for your model and it lists every part that fits it.\u003c\/p\u003e","brand":"Miraco","offers":[{"title":"Default Title","offer_id":44267729879235,"sku":"507G","price":2.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/507g.png?v=1790788270"},{"product_id":"miraco-510b-valve-base-top-for-the-blue-valve","title":"Miraco 510B Valve base top for the blue valve","description":"\u003cp\u003eThis piece works with Miraco part 508 as they screw into each other on the older blue waterer valves. Miraco Orifice parts 583 or 509 will sit between the two pieces to create a complete valve base.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShown on the parts breakdowns for these Miraco models:\u003c\/strong\u003e 2700, 2800, 2900, 3000, 3100, 3200, 3310, 3310-4, 3310-S, 3320, 3320-1, 3321-1, 3330, 3330E, 3340, 3340E, 3345, 3345E, 3350, 3354-S, 3354SE, 3360, 3360-10, 3370-S, 3390, 3390E, 3410, 3410-4, 3410-4E, 3410E, 3465, 3465E, 3500. If you are not sure which unit you have, open the breakdown for your model and it lists every part that fits it.\u003c\/p\u003e","brand":"Miraco","offers":[{"title":"Default Title","offer_id":44267730010307,"sku":"510B","price":4.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/3785070427.png?v=1740709697"},{"product_id":"miraco-514-base-screw-for-blue-valves","title":"Miraco 514 Base Screw for Blue Valves","description":"\u003cp\u003eEnsure the integrity of your Miraco blue valve assembly with the 514 Base Screw. Crafted from stainless steel, this screw securely joins the Bottom Base (Part 508) and Top Base (Part 510) in your automatic waterer. A total of four screws are necessary per valve to provide a reliable and watertight connection, contributing to the efficient operation of your livestock watering system. \u003c\/p\u003e","brand":"Miraco","offers":[{"title":"Default Title","offer_id":44267730043075,"sku":"514","price":0.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/4702623107.jpg?v=1740709701"},{"product_id":"miraco-515b-valve-upper-arm-blue-valve","title":"Miraco 515B Valve Upper Arm - Blue Valve","description":"\u003cp\u003eReplacement upper arm for the Miraco Valve. Used in the older style Blue Miraco Valve, part 521B. This piece activates the plunger inside the Blue valve.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShown on the parts breakdowns for these Miraco models:\u003c\/strong\u003e 2700, 2800, 2900, 3000, 3100, 3200, 3310, 3310-4, 3310-S, 3320, 3320-1, 3321-1, 3330, 3330E, 3340, 3340E, 3345, 3345E, 3350, 3354-S, 3354SE, 3360, 3360-10, 3370-S, 3390, 3390E, 3410, 3410-4, 3410-4E, 3410E, 3465, 3465E, 3500. If you are not sure which unit you have, open the breakdown for your model and it lists every part that fits it.\u003c\/p\u003e","brand":"Miraco","offers":[{"title":"Default Title","offer_id":44267730075843,"sku":"515B","price":3.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/4700451073.webp?v=1740709703"},{"product_id":"miraco-516b-valve-lower-arm-blue","title":"Miraco 516B Valve Lower Arm - Blue","description":"\u003cp\u003eThis small piece is the replacement arm to the Blue Miraco automatic waterer valve, part 521B. This piece connects to the nylon ratchet of the designated float assembly in your Miraco waterer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShown on the parts breakdowns for these Miraco models:\u003c\/strong\u003e 2700, 2800, 2900, 3000, 3100, 3200, 3310, 3310-4, 3310-S, 3320, 3320-1, 3321-1, 3330, 3330E, 3340, 3340E, 3345, 3345E, 3350, 3354-S, 3354SE, 3360, 3360-10, 3370-S, 3390, 3390E, 3410, 3410-4, 3410-4E, 3410E, 3465, 3465E, 3500. If you are not sure which unit you have, open the breakdown for your model and it lists every part that fits it.\u003c\/p\u003e","brand":"Miraco","offers":[{"title":"Default Title","offer_id":44267730108611,"sku":"516B","price":3.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/3785070354.png?v=1740709704"},{"product_id":"miraco-521-grey-valve-internal-parts-repair-kit","title":"Miraco 521 Grey Valve Internal Parts Repair Kit","description":"\u003cp\u003eNo need to replace the entire grey 521 valve when the internal parts can be replaced instead. This kit includes everything needed for the rebuild.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2 x 681 valve pins\u003c\/li\u003e\n\u003cli\u003e1 x 677 plunger with valve seat\u003c\/li\u003e\n\u003cli\u003e1 x 678 upper arm\u003c\/li\u003e\n\u003cli\u003e1 x 679 lower arm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eThese parts fit the grey valve only.\u003c\/strong\u003e If your valve is blue, use the Miraco 521B valve internal parts repair kit instead. The valves swap one for one, but the parts inside them do not.\u003c\/p\u003e","brand":"Miraco","offers":[{"title":"Default Title","offer_id":44267730141379,"sku":"681x2, 677, 678, 679","price":13.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/4747499061.webp?v=1740709706"},{"product_id":"miraco-660-float-arm","title":"Miraco 660 Float arm","description":"\u003cp\u003eReplacement 660 arm for Miraco Float.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShown on the Miraco 3350 parts breakdown.\u003c\/strong\u003e If you are not sure which unit you have, that breakdown lists every part that fits it.\u003c\/p\u003e","brand":"Miraco","offers":[{"title":"Default Title","offer_id":44267730370755,"sku":"660","price":9.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/1358803189_28f7e7cd-096e-49e6-965e-4b67b17d18dd.jpg?v=1740709715"},{"product_id":"miraco-661-float-assembly","title":"Miraco 661 Float assembly","description":"\u003cp\u003eReplacement Float assembly for the Miraco 3350, 4 hole automatic waterer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eASSEMBLY INCLUDES:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e342 Nylon ratchet\u003c\/li\u003e\n\u003cli\u003e343 Brass Thumb Screw\u003c\/li\u003e\n\u003cli\u003e345 4\" x 4\" bob float\u003c\/li\u003e\n\u003cli\u003e660 Float Arm 6\"\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUse with Miraco Float assemblies 440 or single valve 521. \u003c\/p\u003e\u003cp\u003e\u003ciframe width=\"500\" height=\"281\" src=\"https:\/\/www.youtube.com\/embed\/CzEfMcSdecM\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cbr\u003e","brand":"Miraco","offers":[{"title":"Default Title","offer_id":44267730436291,"sku":"661","price":20.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/1193473525_4807616a-4416-4b94-8e8b-d7877147763f.jpg?v=1740709717"},{"product_id":"miraco-678g-valve-upper-arm-grey-valve","title":"Miraco 678G Valve Upper Arm - Grey Valve","description":"\u003cp\u003eReplacement upper arm for the Grey Miraco Valve. Used in the current Grey Miraco Valve, part 521. This piece activates the plunger inside the valve. Use pin 681G to secure in place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShown on the parts breakdowns for these Miraco models:\u003c\/strong\u003e 2700, 2800, 2900, 3000, 3100, 3200, 3310, 3310-4, 3310-S, 3320, 3320-1, 3321-1, 3330, 3330E, 3340, 3340E, 3345, 3345E, 3350, 3354-S, 3354SE, 3360, 3360-10, 3370-S, 3390, 3390E, 3410, 3410-4, 3410-4E, 3410E, 3465, 3465E, 3500. If you are not sure which unit you have, open the breakdown for your model and it lists every part that fits it.\u003c\/p\u003e","brand":"Miraco","offers":[{"title":"Default Title","offer_id":44267730469059,"sku":"678G","price":3.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/4701705104.jpg?v=1740709718"},{"product_id":"miraco-679-valve-lower-arm-for-grey-high-pressure-valve","title":"Miraco 679 Valve Lower Arm for Grey High Pressure Valve","description":"\u003cp\u003eThis small piece is the replacement arm to the Grey Miraco automatic waterer valve, part 521. This piece connects to the nylon ratchet of the designated float assembly in your Miraco waterer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShown on the parts breakdowns for these Miraco models:\u003c\/strong\u003e 2700, 2800, 2900, 3000, 3100, 3200, 3310, 3310-4, 3310-S, 3320, 3320-1, 3321-1, 3330, 3330E, 3340, 3340E, 3345, 3345E, 3350, 3354-S, 3354SE, 3360, 3360-10, 3370-S, 3390, 3390E, 3410, 3410-4, 3410-4E, 3410E, 3465, 3465E, 3500. If you are not sure which unit you have, open the breakdown for your model and it lists every part that fits it.\u003c\/p\u003e","brand":"Miraco","offers":[{"title":"Default Title","offer_id":44267730501827,"sku":"679","price":3.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/4729626880.jpg?v=1740709719"},{"product_id":"miraco-680-rubber-valve-seat-grey-valve","title":"Miraco 680 Rubber Valve Seat - Grey Valve","description":"\u003cp\u003eThe rubber 680 Miraco valve seat FOR GREY VALVE allows the valve to seal properly to stop the flow of water once the water level in the trough has reached its max. capacity. Sold individually.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShown on the parts breakdowns for these Miraco models:\u003c\/strong\u003e 2700, 2800, 2900, 3000, 3100, 3200, 3310, 3310-4, 3310-S, 3320, 3320-1, 3321-1, 3330, 3330E, 3340, 3340E, 3345, 3345E, 3350, 3354-S, 3354SE, 3360, 3360-10, 3370-S, 3390, 3390E, 3410, 3410-4, 3410-4E, 3410E, 3465, 3465E, 3500. If you are not sure which unit you have, open the breakdown for your model and it lists every part that fits it.\u003c\/p\u003e","brand":"Miraco","offers":[{"title":"Default Title","offer_id":44267730534595,"sku":"680","price":0.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/miraco_680_1bbadb83-07fd-4752-8f89-1c562ca19314.png?v=1790288882"},{"product_id":"miraco-681g-lock-pin-for-grey-miraco-valves","title":"Miraco 681G Lock Pin for Grey Miraco Valves","description":"\u003cp\u003eLock Pin replacement for the Miraco Valves, part number 681G. Each Grey valve will require two lock pins one for the upper arm, the other for the lower arm. \u003c\/p\u003e\u003cp\u003eNote: To remove, press together the slotted end to allow pin to slide through. \u003c\/p\u003e","brand":"Miraco","offers":[{"title":"Default Title","offer_id":44267730600131,"sku":"681G","price":1.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/4702103332.jpg?v=1740709722"},{"product_id":"miraco-anchor-clip-353","title":"Miraco Anchor Clip 353","description":"\u003cp\u003eMiraco anchor clip 353 often used in ball waterers such as the Miraco 3354-s and 3354-SE, and 3410 hog waterer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShown on the parts breakdowns for these Miraco models:\u003c\/strong\u003e 3310, 3310-4, 3310-S, 3330, 3330E, 3340, 3340E, 3345, 3345E, 3350, 3354-S, 3354SE, 3360, 3360-10, 3370-S, 3390, 3390E, 3410, 3410-4, 3410-4E, 3410E, 3465, 3465E. If you are not sure which unit you have, open the breakdown for your model and it lists every part that fits it.\u003c\/p\u003e","brand":"Miraco","offers":[{"title":"Default Title","offer_id":44267731157187,"sku":"353","price":9.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/353_bracket.jpg?v=1788998405"},{"product_id":"miraco-custom-elbow-tee-3-4-673","title":"Miraco Custom Elbow Tee 3\/4 inch for pre-2016 ball waterers, part number 673","description":"\u003cp\u003eEnsure your livestock's waterer operates seamlessly with the Miraco 3\/4\" Custom Elbow Tee (Part 673). Designed specifically for Miraco ball waterers built before May 2016, this durable, high-density poly fitting provides a secure and reliable connection between your waterline and the 521 Valve. Featuring a molded hose barb and threaded valve connection, it’s simple to install and built to last.\u003c\/p\u003e\u003cp\u003eFor waterers manufactured after May 2016, use Part 672 instead.\u003c\/p\u003e","brand":"Miraco","offers":[{"title":"Default Title","offer_id":44267731779779,"sku":"673","price":11.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/1291988746.jpg?v=1740709772"},{"product_id":"miraco-custom-tee-o-ring-676","title":"Miraco Custom Tee O-Ring for pre-2016 ball waterers, part number 676","description":"\u003cp\u003eUsed on older 673 special-T for Miraco waterers. The 673 is used in older ball waterers that were built before March of 2016.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShown on the parts breakdowns for these Miraco models:\u003c\/strong\u003e 3330, 3330E, 3340, 3340E, 3345, 3345E, 3350, 3354-S, 3354SE, 3370-S, 3390, 3390E, 3465, 3465E. If you are not sure which unit you have, open the breakdown for your model and it lists every part that fits it.\u003c\/p\u003e","brand":"Miraco","offers":[{"title":"Default Title","offer_id":44267731845315,"sku":"676","price":0.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/4697326217.jpg?v=1740709775"},{"product_id":"miraco-high-pressure-orifice-3-16-583-for-blue-valve","title":"Miraco High Pressure Orifice 3\/16\" 583 for blue valve","description":"\u003cp\u003eThis replacement piece will go in between the lower and upper base portion of the older style Miraco valves in blue. The smaller orifice allows the valve to accommodate water pressures between 40-80 PSI.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShown on the parts breakdowns for these Miraco models:\u003c\/strong\u003e 2700, 2800, 2900, 3000, 3100, 3200, 3310, 3310-4, 3310-S, 3320, 3320-1, 3321-1, 3330, 3330E, 3340, 3340E, 3345, 3345E, 3350, 3354-S, 3354SE, 3360, 3360-10, 3370-S, 3390, 3390E, 3410, 3410-4, 3410-4E, 3410E, 3465, 3465E, 3500. If you are not sure which unit you have, open the breakdown for your model and it lists every part that fits it.\u003c\/p\u003e","brand":"Miraco","offers":[{"title":"Default Title","offer_id":44267732795587,"sku":"583","price":2.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/miraco583.jpg?v=1788998413"},{"product_id":"miraco-high-pressure-valve-gray-40-80-psi-521","title":"Miraco 521 Grey High Pressure Valve 40-80 PSI","description":"\u003cp\u003eThe Miraco 521 is the current grey high pressure valve for Miraco automatic waterers. It is rated for water pressure from 40 to 80 PSI and flows an average of 12.5 gallons per minute, so the trough refills quickly after a group comes to water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIt is a one for one replacement for the blue 521B, and for the older orange and red valves.\u003c\/strong\u003e The threads are the same, the pressure rating is the same and the flow is the same, so nothing else in the unit has to change.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe internal repair parts are not interchangeable.\u003c\/strong\u003e Grey valves take grey parts, blue valves take blue parts. If you are rebuilding rather than replacing, match the color of the valve in your hand, not the color the unit shipped with.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e40 to 80 PSI\u003c\/li\u003e\n\u003cli\u003eAverage 12.5 gallons per minute\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the blue 521B and the older orange and red valves\u003c\/li\u003e\n\u003cli\u003eComes complete and ready to install\u003c\/li\u003e\n\u003cli\u003eRebuildable with the Miraco 521 grey valve internal parts repair kit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Miraco","offers":[{"title":"Default Title","offer_id":44267732861123,"sku":"521","price":20.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/521.png?v=1790788370"},{"product_id":"miraco-inspection-plug-gasket-712","title":"Miraco Inspection Plug Gasket 712","description":"\u003cp\u003eReplacement gasket for the inspection plug for the Miraco automatic waterers.  Used on the multiple Miraco automatic waterers to seal against the wind and the cold. \u003c\/p\u003e\u003cdiv style=\"border-left:4px solid #b9902a;background:#fdf8e9;padding:16px 18px;margin:18px 0;border-radius:4px;\"\u003e\n\u003cp style=\"margin:0 0 8px;font-weight:700;color:#8a6a1f;\"\u003eInstall in warm weather\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:0.95em;line-height:1.55;\"\u003eIt is best to install a gasket during warm weather, because the adhesive sticks better. If you are installing in cold weather, warm the surface first for the best adhesion.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Miraco","offers":[{"title":"Default Title","offer_id":44267733287107,"sku":"712","price":4.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/4746737347.webp?v=1740709847"},{"product_id":"miraco-inspection-plug-604-5","title":"Miraco Inspection plug 604-5","description":"\u003cp\u003eReplacement inspection plug found on the 3350 E-fount and the older style 3360 waterer.  The inspection plug is used to access the valve and float system in the units.  \u003c\/p\u003e\u003cp\u003eThe inspection plug is fully insulated to help keep the water cooler in the summer, warmer in the winter.  Use gasket piece 712 to create a seal against the wind and cold in the winter. \u003c\/p\u003e","brand":"Miraco","offers":[{"title":"Default Title","offer_id":44267733418179,"sku":"604-5","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/992656237.jpg?v=1740709853"},{"product_id":"miraco-lag-bolt-5-16-in-x-2-1-2-in-stainless-steel-706","title":"Miraco Lag Bolt 5\/16 in x 2 1\/2 in Stainless Steel 706","description":"\u003cp\u003eReplacement Miraco Lag Bolt, part number 706. Made of stainless steel for long life and to prevent corrosion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShown on the parts breakdowns for these Miraco models:\u003c\/strong\u003e 3345, 3345E, 3350, 3354-S, 3354SE, 3360, 3360-10, 3370-S, 3390, 3390E, 3410, 3410-4, 3410-4E, 3410E, 3465, 3465E. If you are not sure which unit you have, open the breakdown for your model and it lists every part that fits it.\u003c\/p\u003e","brand":"Miraco","offers":[{"title":"Default Title","offer_id":44267733483715,"sku":"706","price":1.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/706.png?v=1792094114"},{"product_id":"miraco-lid-bracket-544","title":"Miraco Lid Bracket 544","description":"\u003cp\u003eReplacement Miraco Lid bracket. Made of stainless steel for long life. Use two of the Miraco 545 Bolts to secure brackets to the frame. (Sold Separately.)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShown on the parts breakdowns for these Miraco models:\u003c\/strong\u003e 1100, 1200, 3310, 3310-4, 3310-S, 3330, 3330E, 3350, 3360, 3360-10, 3410, 3410-4, 3410-4E, 3410E. If you are not sure which unit you have, open the breakdown for your model and it lists every part that fits it.\u003c\/p\u003e","brand":"Miraco","offers":[{"title":"Default Title","offer_id":44267733582019,"sku":"544","price":3.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/4697473513.jpg?v=1740709859"},{"product_id":"miraco-model-3350-4-hole-energy-free-waterer","title":"Miraco Model 3350 4-hole energy free waterer","description":"\u003cp\u003e\u003cstrong\u003e\u003cem\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cspan style=\"background-color: rgb(255, 255, 0);\"\u003eWarm Climate Waterer Only\u003c\/span\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Mirafount 4-hole energy-free 3350 livestock waterer provides a constant supply of water on demand to your dairy or beef herd.  The automatic waterer will water up to 180 head of beef, 70 head of dairy and will hold up to 33 gallons of water.  Fully insulated to keep the water cooler in the summer, warmer in the winter and the 3350 features a 5-year manufacturers warranty.  \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFEATURES:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMiraco's patented roll-away, insulated balls that extend past the top to check when driving by\u003c\/li\u003e\n\u003cli\u003eRemovable inspection plug for easy access to the valve and float\u003c\/li\u003e\n\u003cli\u003eWater will run towards drain plug with the sloped bottom\u003c\/li\u003e\n\u003cli\u003eFully sealed foam insulation with an R-factor of 7 per inch\u003c\/li\u003e\n\u003cli\u003eImpact resistant poly construction \u003c\/li\u003e\n\u003cli\u003eStainless Steel anchor bolts included\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Miraco","offers":[{"title":"Default Title","offer_id":44267734302915,"sku":"3350","price":789.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/3350.png?v=1784152418"},{"product_id":"miraco-outer-fill-pipe-462","title":"Miraco Outer Fill Pipe #462","description":"\u003cp\u003eThe Miraco Outer Fill Pipe replacement is found in the Model 3350 Units. The 3350 is a 4-hole Miraco Automatic Waterer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShown on the Miraco 3350 parts breakdown.\u003c\/strong\u003e If you are not sure which unit you have, that breakdown lists every part that fits it.\u003c\/p\u003e","brand":"Miraco","offers":[{"title":"Default Title","offer_id":44267734368451,"sku":"462","price":12.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/outerfillpipe.png?v=1790372281"},{"product_id":"miraco-pipe-insulation-part-number-355","title":"Miraco Pipe Insulation part number 355","description":"\u003cp\u003ePipe insulation replacement for the Miraco automatic waterers. This is often used in both the Mirafount and E-fount series units for added protection along the waterline.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShown on the parts breakdowns for these Miraco models:\u003c\/strong\u003e 3310, 3310-4, 3310-S, 3320, 3320-1, 3321-1, 3330, 3330E, 3340, 3340E, 3345, 3345E, 3350, 3354-S, 3354SE, 3360, 3360-10, 3370-S, 3390, 3390E, 3410, 3410-4, 3410-4E, 3410E, 3465, 3465E. If you are not sure which unit you have, open the breakdown for your model and it lists every part that fits it.\u003c\/p\u003e","brand":"Miraco","offers":[{"title":"Default Title","offer_id":44267734597827,"sku":"355","price":10.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/355side.jpg?v=1790369625"},{"product_id":"miraco-plunger-513","title":"Miraco Plunger 513","description":"\u003cp\u003eThe Miraco 513 Plunger is a vital part of your livestock watering system, designed specifically for use with Miraco's blue 521B valves. It ensures a secure seal and regulates water flow, contributing to the dependable performance of your automatic waterers.\u003c\/p\u003e\u003cp\u003eFor optimal results, pair the 513 Plunger with the included Miraco 512 Plunger Seat. Together, they create a tight seal in the valve system, preventing leaks and maintaining a consistent water supply for your livestock.\u003c\/p\u003e\u003cp\u003eRegular maintenance of your 521B valve, including timely replacement of parts like the 513 Plunger, can significantly enhance the lifespan of your Miraco waterers, ensuring reliable hydration for your animals without the need for a complete valve replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNOTE: The 513 is not interchangeable with the grey 521 valve.  \u003c\/strong\u003e\u003c\/p\u003e","brand":"Miraco","offers":[{"title":"Default Title","offer_id":44267734663363,"sku":"513","price":3.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/Miraco_513.jpg?v=1789863684"},{"product_id":"miraco-plunger-677-for-grey-valve","title":"Miraco Plunger 677 for Grey Valve","description":"\u003cp\u003eThe Miraco 677 Plunger is a replacement part specifically designed for Miraco's grey 521 high-pressure valves. It securely holds the valve plunger rubber (part 680) and comes with a plunger seat to ensure effective water flow regulation. Compatible with all Miraco automatic waterers using the grey valve, this plunger offers reliable water management and extends the life of your livestock watering system without the need to replace the entire valve.\u003c\/p\u003e","brand":"Miraco","offers":[{"title":"Default Title","offer_id":44267734696131,"sku":"677","price":3.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/677.png?v=1790788521"},{"product_id":"miraco-plunger-seat-512-blue-valve-seat","title":"Miraco Plunger Seat 512 - Blue Valve Seat","description":"\u003cp\u003eThe Miraco plunger seat seals the Miraco BLUE valve.  Overtime the plunger seat may become worn or deposits in the water may accumulate on the seat also preventing the valve from sealing.  Replace as needed. \u003c\/p\u003e\u003cp\u003eMiraco Plunger, part number 512.  These are to be used with valve part numbers 521. \u003c\/p\u003e","brand":"Miraco","offers":[{"title":"Default Title","offer_id":44267734728899,"sku":"512","price":0.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/512_valve_seat.jpg?v=1790349397"},{"product_id":"miraco-replacement-5-16-inch-x-1-inch-stainless-steel-bolt-352","title":"Miraco Replacement 5\/16 inch x 1 inch Stainless Steel Bolt 352","description":"\u003cp\u003eMiraco 5\/16\" x 1\" replacement stainless steel bolt. Designed for long life and the stainless steel will prevent corrosion and rust.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShown on the parts breakdowns for these Miraco models:\u003c\/strong\u003e 3310, 3310-4, 3310-S, 3330, 3330E, 3340, 3340E, 3345, 3345E, 3350, 3354-S, 3354SE, 3360, 3360-10, 3370-S, 3390, 3390E, 3410, 3410-4, 3410-4E, 3410E, 3465, 3465E. If you are not sure which unit you have, open the breakdown for your model and it lists every part that fits it.\u003c\/p\u003e","brand":"Miraco","offers":[{"title":"Default Title","offer_id":44267734794435,"sku":"352","price":0.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/Miraco_352_Bolt.jpg?v=1788998414"},{"product_id":"miraco-replacement-5-16-inch-x-2-inch-stainless-steel-306","title":"Miraco Replacement 5\/16 inch x 2 inch Stainless Steel 306","description":"\u003cp\u003eReplacement 5\/16\" x 2\" Stainless steel bolt for Miraco waterers, part 306. Available individually Use this bolt to hold down the Center Dome on Miraco waterers such as the several of the Miraco automatic waterers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShown on the parts breakdowns for these Miraco models:\u003c\/strong\u003e 2700, 2800, 2900, 3330, 3330E, 3340, 3340E, 3345, 3345E, 3350, 3354-S, 3354SE, 3360, 3370-S, 3390, 3390E, 3465, 3465E, 3500. If you are not sure which unit you have, open the breakdown for your model and it lists every part that fits it.\u003c\/p\u003e","brand":"Miraco","offers":[{"title":"Default Title","offer_id":44267734827203,"sku":"306","price":0.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/306bolt.jpg?v=1788998415"},{"product_id":"miraco-replacement-bottom-gasket-115-part-426","title":"Miraco Replacement Bottom Gasket 115\" - part 426","description":"\u003cp\u003eThis Miraco replacement gasket is the bottom gasket found with the 3345, 3345-E and 3350 automatic waterers. 115\" in length, the gasket should be replaced when worn, or when reinstalling your waterer in a new location.\u003c\/p\u003e\u003cdiv style=\"border-left:4px solid #b9902a;background:#fdf8e9;padding:16px 18px;margin:18px 0;border-radius:4px;\"\u003e\n\u003cp style=\"margin:0 0 8px;font-weight:700;color:#8a6a1f;\"\u003eInstall in warm weather\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:0.95em;line-height:1.55;\"\u003eIt is best to install a gasket during warm weather, because the adhesive sticks better. If you are installing in cold weather, warm the surface first for the best adhesion.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003e\u003cstrong\u003eShown on the parts breakdowns for these Miraco models:\u003c\/strong\u003e 3310-4, 3345, 3345E, 3350. If you are not sure which unit you have, open the breakdown for your model and it lists every part that fits it.\u003c\/p\u003e","brand":"Miraco","offers":[{"title":"Default Title","offer_id":44267734859971,"sku":"426","price":11.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/4746932519.jpg?v=1740709915"},{"product_id":"miraco-rubber-2-drain-plug-w-bolt-part-number-442","title":"Miraco Rubber 2\" Drain Plug w\/bolt, Part number 442","description":"\u003cp\u003eMiraco's 442 Rubber drain plug w\/bolt and wing nut. The stainless steel wing nut can be tightened to apply additional pressure and create a better seal.  The 2 inch drain plug is found in any Miraco ball closure units such as the Mirafount and E-fount series. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThis drain plug is universal to the ball waterers.\u003c\/li\u003e\n\u003cli\u003e2\" drain plug (see measurements)\u003c\/li\u003e\n\u003cli\u003eStainless steel bolt and wing-nut for long-life and to prevent corrosion. \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Miraco","offers":[{"title":"Default Title","offer_id":44267734991043,"sku":"442","price":10.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/4697299374.jpg?v=1740709919"},{"product_id":"miraco-special-t-plug-replacement-674","title":"Miraco Special T Plug for pre-2016 ball waterers, part number 674","description":"\u003cp\u003eReplacement plug for the 673 Special \"T\". This plug will go on the top of the special T that is found in Miraco units older than May of 2016.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShown on the parts breakdowns for these Miraco models:\u003c\/strong\u003e 3330, 3330E, 3340, 3340E, 3345, 3345E, 3350, 3354-S, 3354SE, 3360, 3370-S, 3390, 3390E, 3465, 3465E. If you are not sure which unit you have, open the breakdown for your model and it lists every part that fits it.\u003c\/p\u003e","brand":"Miraco","offers":[{"title":"Default Title","offer_id":44267735023811,"sku":"674","price":1.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/files\/674.png?v=1790371613"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/1894\/5731\/collections\/3350.png?v=1788041665","url":"https:\/\/www.petecosupply.com\/collections\/miraco-mirafount-3350-parts-breakdown.oembed","provider":"PeteCo Supply, LLC. ","version":"1.0","type":"link"}